PartsTable
Technical Data Sheet
Download PDF

32582CP — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

32582CP: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, thickness: 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN, hole_diameter: 0.242 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN, overall_diameter: 0.348 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-100-0632, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
32582CP
NSN: 5310-01-100-0632
FSC: 5310 — Nuts and Washers
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
thickness0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
hole_diameter0.242 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
overall_diameter0.348 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
criticality_code_justificationZZZY
material_document_and_classificationAMS36518 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
reference_number_differentiating_characteristicsCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN5310-01-100-0632
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 32582CP · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.348 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS36518 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: PLASTIC OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.242 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.348 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZY
MATERIAL DOCUMENT AND CLASSIFICATIONAMS36518 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIALPLASTIC OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.242 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
THICKNESS0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
32582Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
52660-300 ITEM NO. 20Reference document
Same NSN cross-reference
Reference document — Secondary reference
52660-300 ITEM NO. 20CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 32582CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 32582CP?
32582CP is a WASHER,FLAT.
What parts can replace 32582CP?
There are 3 known substitutes for 32582CP: 32582, 52660-300 ITEM NO. 20, 52660-300 ITEM NO. 20CP. Substitute compatibility should be verified for your specific system.
What is the NSN for 32582CP?
32582CP is cataloged in the U.S. Government catalog under NSN 5310-01-100-0632. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 32582CP

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.