PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 325301PC6
325301PC6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING MATERIAL is a the manufacturer industrial component. Key specifications include length: 8.000 INCHES NOMINAL IN, material: ASBESTOS CHRYSOTILE AND OIL LUBRICATING AND GRAPHITE, fabrication_method: TWISTED, lubrication_material: OIL, cross-sectional_shape_style: CIRCULAR, nondefinitive_spec/std_data: 3 TYPE AND A GRADE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-576-9305, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
325301PC6
NSN: 5330-00-576-9305
FSC: 5330
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
length8.000 INCHES NOMINAL IN
materialASBESTOS CHRYSOTILE AND OIL LUBRICATING AND GRAPHITE
fabrication_methodTWISTED
lubrication_materialOIL
cross-sectional_shape_styleCIRCULAR
nondefinitive_spec/std_data3 TYPE AND A GRADE
cross_section_outside_diameter0.188 INCHES NOMINAL IN
material_document_and_classificationHH-P-51, TYPE 3-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE
NSN5330-00-576-9305
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 325301PC6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 8.000 INCHES NOMINAL IN
•
CROSS SECTION OUTSIDE DIAMETER: 0.188 INCHES NOMINAL IN
•
MATERIAL: ASBESTOS CHRYSOTILE AND OIL LUBRICATING AND GRAPHITE
•
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND A GRADE
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-51, TYPE 3-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE
•
LUBRICATION MATERIAL: OIL
•
FABRICATION METHOD: TWISTED
•
CROSS-SECTIONAL SHAPE STYLE: CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH8.000 INCHES NOMINAL IN
CROSS SECTION OUTSIDE DIAMETER0.188 INCHES NOMINAL IN
MATERIALASBESTOS CHRYSOTILE AND OIL LUBRICATING AND GRAPHITE
NONDEFINITIVE SPEC/STD DATA3 TYPE AND A GRADE
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-51, TYPE 3-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE
LUBRICATION MATERIALOIL
FABRICATION METHODTWISTED
CROSS-SECTIONAL SHAPE STYLECIRCULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
FV-21-554-DInterchangeable
interchangeable cross-reference
interchangeable
HHP51TYPE3GRADEAInterchangeable
interchangeable cross-reference
interchangeable
HHP51ANDTYPE3ANDGRADEAInterchangeable
interchangeable cross-reference
interchangeable
00-00-41688-0020Interchangeable
interchangeable cross-reference
interchangeable
89398Interchangeable
interchangeable cross-reference
interchangeable
XGD60C1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 325301PC6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 325301PC6?
325301PC6 is a PACKING MATERIAL.
What parts can replace 325301PC6?
There are 7 known substitutes for 325301PC6: FV-21-554-D, HHP51TYPE3GRADEA, HHP51ANDTYPE3ANDGRADEA and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 325301PC6?
325301PC6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-576-9305. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 325301PC6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026