3250P1-501 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

3250P1-501: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: RECTANGULAR W/MOUNTING HOLES, body_width: 0.220 INCHES NOMINAL IN, body_height: 0.500 INCHES NOMINAL IN, body_length: 0.500 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.035 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-070-5945, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 3250P1-501

NSN: 5905-00-070-5945
NIINs: 000705945, 008094871
FSC: 5905 — Resistor
CAGE: 80294 — BOURNS INSTRUMENTS INC (USA)

SPECIFICATIONS

body_style	RECTANGULAR W/MOUNTING HOLES
body_width	0.220 INCHES NOMINAL IN
body_height	0.500 INCHES NOMINAL IN
body_length	0.500 INCHES NOMINAL IN
shaft_style	ROUND, SLOTTED
shaft_length	0.035 INCHES NOMINAL IN
actuator_type	SINGLE SHAFT
shaft_diameter	0.520 INCHES NOMINAL IN
mounting_method	TERMINAL AND UNTHREADED HOLE(S)
terminal_length	0.500 INCHES MINIMUM IN
section_quantity	1
features_provided	HUMIDITY PROOF
NSN	5905-00-070-5945

COMPONENT DIAGRAM

KEY FEATURES

•

ELECTRICAL RESISTANCE PER SECTION: 500.0 OHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 150.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

MOUNTING FACILITY QUANTITY: 2

•

SHAFT DIAMETER: 0.083 INCHES NOMINAL IN

•

BODY STYLE: RECTANGULAR W/MOUNTING HOLES

•

PRECIOUS MATERIAL: GOLD

•

TERMINAL LENGTH: 0.172 INCHES MINIMUM IN

TECHNICAL CHARACTERISTICS

ELECTRICAL RESISTANCE PER SECTION	500.0 OHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
SECTION QUANTITY	1
MOUNTING FACILITY QUANTITY	2
SHAFT DIAMETER	0.083 INCHES NOMINAL IN
BODY STYLE	RECTANGULAR W/MOUNTING HOLES
PRECIOUS MATERIAL	GOLD
TERMINAL LENGTH	0.172 INCHES MINIMUM IN
MOUNTING METHOD	TERMINAL AND UNTHREADED HOLE(S)
BODY WIDTH	0.219 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 5

301-120H500Reference document

Same NSN cross-reference

Reference document — Secondary reference

5905PL0305961Reference document

Same NSN cross-reference

Reference document — Informative reference only

819798-6Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

930940-9Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

PC68273-2Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 3250P1-501?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 3250P1-501?

3250P1-501 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).

What parts can replace 3250P1-501?

There are 5 known substitutes for 3250P1-501: 301-120H500, 5905PL0305961, 819798-6 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 3250P1-501?

3250P1-501 is cataloged in the U.S. Government catalog under NSN 5905-00-070-5945. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

3250P1-501 — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — 3250P1-501