PartsTable
Technical Data Sheet
Download PDF

3238182 — SENSOR,BROKEN TAPE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

3238182: SENSOR,BROKEN TAPE.

The SENSOR,BROKEN TAPE is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, shank_length: 0.688 INCHES NOMINAL IN, thread_class: 3A A, thread_length: 0.625 INCHES NOMINAL IN, overall_length: 3.312 INCHES NOMINAL IN, shank_diameter: 0.625 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-209-7633, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 3238182
NSN: 5315-00-209-7633
NIINs: 002097633, 010361960
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
shank_length0.688 INCHES NOMINAL IN
thread_class3A A
thread_length0.625 INCHES NOMINAL IN
overall_length3.312 INCHES NOMINAL IN
shank_diameter0.625 INCHES NOMINAL IN
first_end_styleCHAMFERED
style_designatorSHOULDER
thread_directionRIGHT-HAND
shoulder_diameter0.8750 INCHES MINIMUM AND 0.8755 INCHES MAXIMUM IN
first_end_locationBOTH ENDS
first_hole_diameter0.187 INCHES NOMINAL IN
NSN5315-00-209-7633
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3238182 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.625 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.047 INCHES NOMINAL IN
•
FIRST END LOCATION: BOTH ENDS
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
THREAD LENGTH: 0.625 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.187 INCHES NOMINAL IN
•
SHANK LENGTH: 0.688 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.625 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.047 INCHES NOMINAL IN
FIRST END LOCATIONBOTH ENDS
HOLE ARRANGEMENT STYLEONE END DRILLED
THREAD LENGTH0.625 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.187 INCHES NOMINAL IN
SHANK LENGTH0.688 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDER
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-890 ALLOY N0.4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 3238182?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3238182?
3238182 is a SENSOR,BROKEN TAPE. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 3238182?
3238182 is cataloged in the U.S. Government catalog under NSN 5315-00-209-7633. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3238182

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.