The PLUG,VENT is a the manufacturer industrial component. Key specifications include length: 0.656 INCHES NOMINAL IN, material: ALUMINUM ALLOY, thread_class: 3A A, thread_length: 0.406 INCHES NOMINAL IN, inside_diameter: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN, vent_hole_shape: ROUND. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-246-3045, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
3236258-1
NSN:5340-01-246-3045 FSC:5340 — Hardware, Commercial CAGE:59364 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE - TEMPE (WEST WARNER ROAD) (USA)
SPECIFICATIONS
length
0.656 INCHES NOMINAL IN
material
ALUMINUM ALLOY
thread_class
3A A
thread_length
0.406 INCHES NOMINAL IN
inside_diameter
0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
vent_hole_shape
ROUND
special_features
HEX OUTSIDE FLANGE,0.684 IN. MIN AND 0.692 IN. MAX WIDTH ACROSS FLATS; TWO HOLES 0.046 IN. MIN AND 0.051 IN. MAX DIA LOCATED ON FLANGE; SCREEN IS MADE FROM STEEL IN
surface_treatment
ANODIZE
vent_hole_diameter
0.437 INCHES NOMINAL IN
vent_hole_quantity
1
end_connection_type
THREADED
refinement_device_type
WIRE FABRIC
NSN
5340-01-246-3045
COMPONENT DIAGRAM
KEY FEATURES
•
REFINEMENT MEDIUM TYPE: FILTERING
•
VENT HOLE DIAMETER: 0.437 INCHES NOMINAL IN
•
LENGTH: 0.656 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625, TYPE 2, CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE
•
VENT HOLE SHAPE: ROUND
•
THREAD LENGTH: 0.406 INCHES NOMINAL IN
•
END CONNECTION TYPE: THREADED
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/4, T4 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/6, T6 OR T851 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-367, T6 FED SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS
REFINEMENT MEDIUM TYPE
FILTERING
VENT HOLE DIAMETER
0.437 INCHES NOMINAL IN
LENGTH
0.656 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-A-8625, TYPE 2, CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE
VENT HOLE SHAPE
ROUND
THREAD LENGTH
0.406 INCHES NOMINAL IN
END CONNECTION TYPE
THREADED
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-225/4, T4 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/6, T6 OR T851 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-367, T6 FED SPEC SINGLE MATERIAL RESPONSE
INSIDE DIAMETER
0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
SPECIAL FEATURES
HEX OUTSIDE FLANGE,0.684 IN. MIN AND 0.692 IN. MAX WIDTH ACROSS FLATS; TWO HOLES 0.046 IN. MIN AND 0.051 IN. MAX DIA LOCATED ON FLANGE; SCREEN IS MADE FROM STEEL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3236258-1?
3236258-1 is a PLUG,VENT.
What is the NSN for 3236258-1?
3236258-1 is cataloged in the U.S. Government catalog under NSN 5340-01-246-3045. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.