PartsTable
Technical Data Sheet
PartsTable / MRO / 3230-10
3230-10 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FUSE,CARTRIDGE is a the manufacturer industrial component. Key specifications include material: COPPER TERMINAL, body_style: TUBE TYPE, overall_length: 1.250 INCHES NOMINAL IN, overall_diameter: 0.250 INCHES NOMINAL IN, features_provided: NONRENEWABLE FUSIBLE ELEMENT, surface_treatment: NICKEL TERMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-535-2672, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 3230-10
NSN: 5330-00-535-2672
FSC: 5330
CAGE: 96238 — DNE TECHNOLOGIES, INC (USA)
SPECIFICATIONS
materialCOPPER TERMINAL
body_styleTUBE TYPE
overall_length1.250 INCHES NOMINAL IN
overall_diameter0.250 INCHES NOMINAL IN
features_providedNONRENEWABLE FUSIBLE ELEMENT
surface_treatmentNICKEL TERMINAL
interruption_indicator_methodOPAQUE BODY
maximum_voltage_rating_in_volts32.0 AC AND 32.0 DC
continuous_current_rating_in_amps10.000
circuit_over-current_interruption_typeTIME DELAY
circuit_over-current_interruption_delay_time_in_seconds12.0 200 PCT OF CURRENT RATING
NSN5330-00-535-2672
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3230-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
162-129751Interchangeable
interchangeable cross-reference
interchangeable
122-129751Interchangeable
interchangeable cross-reference
interchangeable
3230-10Interchangeable
interchangeable cross-reference
interchangeable
377401-48Interchangeable
interchangeable cross-reference
interchangeable
2DB805Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3230-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3230-10?
3230-10 is a FUSE,CARTRIDGE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 3230-10?
There are 5 known substitutes for 3230-10: 162-129751, 122-129751, 3230-10 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3230-10?
3230-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-535-2672. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3230-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026