PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 322AS118-1
322AS118-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CASTER,SWIVEL is a the manufacturer industrial component. Key specifications include material: STEEL WHEEL RIM, wheel_type: PNEUMATIC TIRE, plate_style: SQUARE-INVERTED V ENDS, tread_width: 3.600 INCHES NOMINAL IN, wheel_diameter: 12.600 INCHES NOMINAL IN, effective_height: 12.000 INCHES MINIMUM AND 13.000 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-848-6017, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
322AS118-1
NSN: 5340-00-848-6017
FSC: 5340
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL WHEEL RIM
wheel_typePNEUMATIC TIRE
plate_styleSQUARE-INVERTED V ENDS
tread_width3.600 INCHES NOMINAL IN
wheel_diameter12.600 INCHES NOMINAL IN
wheel_quantity1
effective_height12.000 INCHES MINIMUM AND 13.000 INCHES MAXIMUM IN
special_featuresINVERT TOP END ONLY
style_designatorSWIVEL OFFSET
features_providedRETRACTABLE WHEEL
caster_plate_width5.500 INCHES NOMINAL IN
caster_plate_length4.500 INCHES NOMINAL IN
NSN5340-00-848-6017
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 322AS118-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL WHEEL RIM
•
STYLE DESIGNATOR: SWIVEL OFFSET
•
CASTER PLATE LENGTH: 4.500 INCHES NOMINAL IN
•
TREAD WIDTH: 3.600 INCHES NOMINAL IN
•
CASTER PLATE MOUNTING HOLE DIAMETER: 0.562 INCHES NOMINAL IN
•
PLATE STYLE: SQUARE-INVERTED V ENDS
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESINVERT TOP END ONLY
MATERIALSTEEL WHEEL RIM
STYLE DESIGNATORSWIVEL OFFSET
MATERIALRUBBER TIRE
CASTER PLATE LENGTH4.500 INCHES NOMINAL IN
TREAD WIDTH3.600 INCHES NOMINAL IN
CASTER PLATE MOUNTING HOLE DIAMETER0.562 INCHES NOMINAL IN
PLATE STYLESQUARE-INVERTED V ENDS
WHEEL QUANTITY1
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH4.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
9232Interchangeable
Pistol,caliber .22,automatic
interchangeable
AN3058-32Interchangeable
interchangeable cross-reference
interchangeable
H9232Interchangeable
interchangeable cross-reference
interchangeable
10108323Interchangeable
interchangeable cross-reference
interchangeable
NAS1925Interchangeable
interchangeable cross-reference
interchangeable
NAS1925-74Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 322AS118-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 322AS118-1?
322AS118-1 is a CASTER,SWIVEL.
What parts can replace 322AS118-1?
There are 14 known substitutes for 322AS118-1: 9232, AN3058-32, H9232 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 322AS118-1?
322AS118-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-848-6017. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 322AS118-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026