PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 322682C91
322682C91 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: RECESSED, seal_width: 0.313 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, outside_diameter: 2.754 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-240-6527, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
322682C91
NSN: 5330-00-240-6527
FSC: 5330
CAGE: 31007 — NAVISTAR INTERNATIONAL CORPORATION DBA NAVISTAR (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleRECESSED
seal_width0.313 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
outside_diameter2.754 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter2.750 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3600 FEET PER MINUTE FT
NSN5330-00-240-6527
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 322682C91 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.313 INCHES NOMINAL IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
•
CASE STYLE: RECESSED
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT DIAMETER: 2.000 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
OUTSIDE DIAMETER: 2.754 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.313 INCHES NOMINAL IN
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
CASE STYLERECESSED
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER2.000 INCHES NOMINAL IN
MATERIALSTEEL CASE
OUTSIDE DIAMETER2.754 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
19831Interchangeable
interchangeable cross-reference
interchangeable
537.8438Interchangeable
interchangeable cross-reference
interchangeable
50-10159Interchangeable
interchangeable cross-reference
interchangeable
GGG-R-180Interchangeable
interchangeable cross-reference
interchangeable
304P50Interchangeable
interchangeable cross-reference
interchangeable
F1983-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 322682C91?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 322682C91?
322682C91 is a SEAL,PLAIN ENCASED.
What parts can replace 322682C91?
There are 14 known substitutes for 322682C91: 19831, 537.8438, 50-10159 and 11 more. Substitute compatibility should be verified for your specific system.
Is 322682C91 still available?
322682C91 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 322682C91

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026