PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3226-9003-0
3226-9003-0 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, case_style: FLANGED, construction: SOLID, outside_diameter: 1.000 INCHES NOMINAL IN, supplementary_features: OVERALL LENGTH: 1 INCH; BODY INSIDE DIAMETER: 0.750 INCH; FLANGE WIDTH: 0.3438 INCH IN, flanged_body_outside_diameter: 1.750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-088-8975, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3226-9003-0
NSN: 5330-01-088-8975
FSC: 5330
CAGE: 11939 — KIDDE FIRE FIGHTING, INC. DIV NATIONAL FOAM (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
case_styleFLANGED
constructionSOLID
outside_diameter1.000 INCHES NOMINAL IN
special_featuresSURFACE FINISH: 125.0 MICROINCHES INTERMEDIATE LAYER; LUBRICANT ACCOMMODATION STYLE: GROOVED CIRCULAR; SURFACE GROOVE LOCATION AND QUANTITY: 1 EXTERNAL
supplementary_featuresOVERALL LENGTH: 1 INCH; BODY INSIDE DIAMETER: 0.750 INCH; FLANGE WIDTH: 0.3438 INCH IN
flanged_body_outside_diameter1.750 INCHES NOMINAL IN
NSN5330-01-088-8975
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3226-9003-0 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGED BODY OUTSIDE DIAMETER: 1.750 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.000 INCHES NOMINAL IN
•
CASE STYLE: FLANGED
•
CONSTRUCTION: SOLID
•
MATERIAL: COPPER ALLOY OVERALL
•
SUPPLEMENTARY FEATURES: OVERALL LENGTH: 1 INCH; BODY INSIDE DIAMETER: 0.750 INCH; FLANGE WIDTH: 0.3438 INCH IN
TECHNICAL CHARACTERISTICS (FLIS)
FLANGED BODY OUTSIDE DIAMETER1.750 INCHES NOMINAL IN
OUTSIDE DIAMETER1.000 INCHES NOMINAL IN
CASE STYLEFLANGED
CONSTRUCTIONSOLID
SPECIAL FEATURESSURFACE FINISH: 125.0 MICROINCHES INTERMEDIATE LAYER; LUBRICANT ACCOMMODATION STYLE: GROOVED CIRCULAR; SURFACE GROOVE LOCATION AND QUANTITY: 1 EXTERNAL
MATERIALCOPPER ALLOY OVERALL
SUPPLEMENTARY FEATURESOVERALL LENGTH: 1 INCH; BODY INSIDE DIAMETER: 0.750 INCH; FLANGE WIDTH: 0.3438 INCH IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
651R10Interchangeable
interchangeable cross-reference
interchangeable
10-161RInterchangeable
interchangeable cross-reference
interchangeable
0-0572-1-10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3226-9003-0?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3226-9003-0?
3226-9003-0 is a SEAL,PLAIN ENCASED.
What parts can replace 3226-9003-0?
There are 3 known substitutes for 3226-9003-0: 651R10, 10-161R, 0-0572-1-10. Substitute compatibility should be verified for your specific system.
Is 3226-9003-0 still available?
3226-9003-0 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3226-9003-0

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026