PartsTable
Technical Data Sheet
Download PDF

3225T8 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3225T8: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.266 INCHES NOMINAL IN, material: STEEL BAND, temp_rating: 212.0 FAHRENHEIT DEGF, overall_width: 0.500 INCHES NOMINAL IN, special_features: INCLUDED CUSHION IS BLACK EPDM, style_designator: SINGLE LOOP. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-494-3146, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3225T8
NSN: 5340-01-494-3146
NIINs: 014943146, 015385535
FSC: 5340 — Hardware, Commercial
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
diameter0.266 INCHES NOMINAL IN
materialSTEEL BAND
temp_rating212.0 FAHRENHEIT DEGF
overall_width0.500 INCHES NOMINAL IN
special_featuresINCLUDED CUSHION IS BLACK EPDM
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentZINC BAND
material_thickness0.031 INCHES NOMINAL IN
loop_inside_diameter1.000 INCHES NOMINAL IN
end_item_identificationF-22 RAPTOR
NSN5340-01-494-3146
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3225T8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APPLICATION/FUNCTION: USED TO SECURE PIPE,CONDUIT, TUBING, AND BUNDLES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.265 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC OVERALL
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
APPLICATION/FUNCTIONUSED TO SECURE PIPE,CONDUIT, TUBING, AND BUNDLES
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.265 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
SURFACE TREATMENTZINC OVERALL
END ITEM IDENTIFICATIONCARRIER, PERSONNEL, FULL TRACKED;M113A3FEATGRUBBER-CUSHIONED; AND BLACK IN COLOR; STRAPS ARE USED TO DAMPEN NOISE AND VIBRATION BETTER; OPERATING TEMP RANGE BETWEEN MINUS 40 TO 212 DEGREES FAHRENHEIT; MRAP BUFFALO MK2A2
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIALSTEEL OVERALL
LOOP INSIDE DIAMETER1.000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3225T8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3225T8?
3225T8 is a CLAMP,LOOP.
What is the NSN for 3225T8?
3225T8 is cataloged in the U.S. Government catalog under NSN 5340-01-494-3146. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3225T8