PartsTable
Technical Data Sheet
Download PDF

3225T68 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3225T68: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include lug_hole_diameter: 6.74688 MILLIMETERS NOMINAL MM, material_thickness: 1.19063 MILLIMETERS NOMINAL MM, loop_inside_diameter: 1.0 INCHES NOMINAL IN, part_name_assigned_by_controlling_agency: VIBRATION DAMPING LOOP CLAMP. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-533-8252, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3225T68
NSN: 5340-01-533-8252
NIINs: 015338252, 016628786
FSC: 5340 — Hardware, Commercial
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
lug_hole_diameter6.74688 MILLIMETERS NOMINAL MM
material_thickness1.19063 MILLIMETERS NOMINAL MM
loop_inside_diameter1.0 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyVIBRATION DAMPING LOOP CLAMP
NSN5340-01-533-8252
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3225T68 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.265 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.046 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL: STEEL CORROSION RESISTING BAND
•
LOOP INSIDE DIAMETER: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.265 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.046 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIALSTEEL CORROSION RESISTING BAND
LOOP INSIDE DIAMETER1.000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
3001146-001Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3225T68?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3225T68?
3225T68 is a CLAMP,LOOP.
What parts can replace 3225T68?
There is 1 known substitute for 3225T68: 3001146-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 3225T68?
3225T68 is cataloged in the U.S. Government catalog under NSN 5340-01-533-8252. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3225T68

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.