PartsTable
Technical Data Sheet
Download PDF

3225T43 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3225T43: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, lug_width: 0.047 INCHES NOMINAL IN, overall_width: 0.500 INCHES NOMINAL IN, special_features: 0.500 WIDE, 17/64 MOUNT HOLE, 3/8OD, 3/64 THICK, style_designator: LEFT HAND CLAMP & BRACKET, lug_hole_diameter: 0.266 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-563-7205, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3225T43
NSN: 5340-01-563-7205
FSC: 5340 — Hardware, Commercial
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialSTEEL BAND
lug_width0.047 INCHES NOMINAL IN
overall_width0.500 INCHES NOMINAL IN
special_features0.500 WIDE, 17/64 MOUNT HOLE, 3/8OD, 3/64 THICK
style_designatorLEFT HAND CLAMP & BRACKET
lug_hole_diameter0.266 INCHES NOMINAL IN
material_diameter0.375 INCHES NOMINAL IN
surface_treatmentZINC BAND
material_thickness0.047 INCHES NOMINAL IN
loop_inside_diameter0.375 INCHES NOMINAL IN
end_item_identificationNSN 5895-01-495-5977; MRAP BUFFALO MK2A2
part_name_assigned_by_controlling_agencyRUBBER CUSHIONED STEEL LOOP STRAP
NSN5340-01-563-7205
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3225T43 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUG HOLE DIAMETER: 0.266 INCHES NOMINAL IN
•
MATERIAL DIAMETER: 0.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LEFT HAND CLAMP & BRACKET
•
MATERIAL THICKNESS: 0.047 INCHES NOMINAL IN
•
LUG WIDTH: 0.047 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC BAND
TECHNICAL CHARACTERISTICS
LUG HOLE DIAMETER0.266 INCHES NOMINAL IN
MATERIAL DIAMETER0.375 INCHES NOMINAL IN
STYLE DESIGNATORLEFT HAND CLAMP & BRACKET
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.047 INCHES NOMINAL IN
LUG WIDTH0.047 INCHES NOMINAL IN
SPECIAL FEATURES0.500 WIDE, 17/64 MOUNT HOLE, 3/8OD, 3/64 THICK
SURFACE TREATMENTZINC BAND
PART NAME ASSIGNED BY CONTROLLING AGENCYRUBBER CUSHIONED STEEL LOOP STRAP
END ITEM IDENTIFICATIONNSN 5895-01-495-5977; MRAP BUFFALO MK2A2
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3225T43?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3225T43?
3225T43 is a CLAMP,LOOP.
What is the NSN for 3225T43?
3225T43 is cataloged in the U.S. Government catalog under NSN 5340-01-563-7205. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3225T43

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.