PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3225T15
3225T15 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.266 INCHES NOMINAL IN, material: RUBBER CUSHION, overall_width: 0.650 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_diameter: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-648-9610, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3225T15
NSN: 5340-01-648-9610
FSC: 5340
CAGE: 3A054 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
diameter0.266 INCHES NOMINAL IN
materialRUBBER CUSHION
overall_width0.650 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_diameter0.500 INCHES NOMINAL IN
surface_treatmentZINC BAND
material_thickness0.047 INCHES NOMINAL IN
loop_inside_diameter1.750 INCHES NOMINAL IN
end_item_identification6115-01-591-1161;GENERATOR,HEATING AND AIR CONDITONER
part_name_assigned_by_controlling_agencyCLAMP,RUBBER-CUSHIONED LOOP
center_to_center_distance_between_loop_and_mounting_hole1.375 INCHES NOMINAL IN
NSN5340-01-648-9610
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3225T15 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL DIAMETER: 0.500 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 1.750 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.047 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
TONGUE HOLE TYPEROUND, UNTHREADED
PART NAME ASSIGNED BY CONTROLLING AGENCYCLAMP,RUBBER-CUSHIONED LOOP
MATERIAL DIAMETER0.500 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.047 INCHES NOMINAL IN
END ITEM IDENTIFICATION6115-01-591-1161;GENERATOR,HEATING AND AIR CONDITONER
MATERIALSTEEL BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.375 INCHES NOMINAL IN
OVERALL WIDTH0.650 INCHES NOMINAL IN
DIAMETER0.266 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
32224Interchangeable
interchangeable cross-reference
interchangeable
09-32224Interchangeable
interchangeable cross-reference
interchangeable
109311Interchangeable
interchangeable cross-reference
interchangeable
MS24335Interchangeable
interchangeable cross-reference
interchangeable
322201-4Interchangeable
interchangeable cross-reference
interchangeable
12423Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3225T15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3225T15?
3225T15 is a CLAMP,LOOP.
What parts can replace 3225T15?
There are 9 known substitutes for 3225T15: 32224, 09-32224, 109311 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3225T15?
3225T15 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-648-9610. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3225T15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026