PartsTable / O-RING / 32245D
32245D
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 4.599 INCHES MINIMUM AND 4.675 INCHES MAXIMUM IN, center_hole_diameter: 4.329 INCHES MINIMUM AND 4.389 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-165-1963, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
32245D
NSN: 5331-00-165-1963 FSC: 5331 — O-RINGCAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER FLUOROCARBON CLASS FPM temp_rating -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF hardness_rating 75.0 SHORE DUROMETER A NOMINAL outside_diameter 4.599 INCHES MINIMUM AND 4.675 INCHES MAXIMUM IN center_hole_diameter 4.329 INCHES MINIMUM AND 4.389 INCHES MAXIMUM IN elongation_percentage 125 MAXIMUM cross-sectional_height 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN NSN 5331-00-165-1963
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 32245D
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• ELONGATION PERCENTAGE: 125 MAXIMUM
• HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
• MATERIAL: RUBBER FLUOROCARBON CLASS FPM
• OUTSIDE DIAMETER: 4.599 INCHES MINIMUM AND 4.675 INCHES MAXIMUM IN
• CENTER HOLE DIAMETER: 4.329 INCHES MINIMUM AND 4.389 INCHES MAXIMUM IN
• CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
• TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE 125 MAXIMUM HARDNESS RATING 75.0 SHORE DUROMETER A NOMINAL MATERIAL RUBBER FLUOROCARBON CLASS FPM OUTSIDE DIAMETER 4.599 INCHES MINIMUM AND 4.675 INCHES MAXIMUM IN CENTER HOLE DIAMETER 4.329 INCHES MINIMUM AND 4.389 INCHES MAXIMUM IN CROSS-SECTIONAL HEIGHT 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN TEMP RATING -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
LHS80A Interchangeable interchangeable cross-reference
interchangeable
36-00400 Interchangeable interchangeable cross-reference
interchangeable
LHS80B Interchangeable interchangeable cross-reference
interchangeable
1084 Interchangeable interchangeable cross-reference
interchangeable
1084M1 Interchangeable interchangeable cross-reference
interchangeable
81245 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 32245D?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 32245D?
32245D is a O-RING.
What parts can replace 32245D?
There are 23 known substitutes for 32245D: LHS80A, 36-00400, LHS80B and 20 more. Substitute compatibility should be verified for your specific system.
Is 32245D still available?
32245D is currently cancelled.