PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 322314 ITEM 46
322314 ITEM 46 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.750 INCHES NOMINAL IN, outside_diameter: 8.132 INCHES NOMINAL IN, housing_bore_diameter: 8.125 INCHES NOMINAL IN, sealing_element_style: ANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-065-4836, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
322314 ITEM 46
NSN: 5330-00-065-4836
FSC: 5330
CAGE: 34712 — LAKE SHORE SYSTEMS, INC. (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.750 INCHES NOMINAL IN
outside_diameter8.132 INCHES NOMINAL IN
housing_bore_diameter8.125 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter6.625 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-065-4836
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 322314 ITEM 46 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 8.132 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
ACCOMMODATED SHAFT DIAMETER: 6.625 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 8.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER8.132 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER6.625 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
MATERIALSTEEL CASE
HOUSING BORE DIAMETER8.125 INCHES NOMINAL IN
SEAL WIDTH0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
66241Interchangeable
interchangeable cross-reference
interchangeable
S6307H3237281Interchangeable
interchangeable cross-reference
interchangeable
7010-7830-200Interchangeable
interchangeable cross-reference
interchangeable
4175387Interchangeable
interchangeable cross-reference
interchangeable
8431-LPDInterchangeable
Same NIIN cross-reference
interchangeable
G21134Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 322314 ITEM 46?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 322314 ITEM 46?
322314 ITEM 46 is a SEAL,PLAIN ENCASED.
What parts can replace 322314 ITEM 46?
There are 10 known substitutes for 322314 ITEM 46: 66241, S6307H3237281, 7010-7830-200 and 7 more. Substitute compatibility should be verified for your specific system.
Is 322314 ITEM 46 still available?
322314 ITEM 46 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 322314 ITEM 46

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026