PartsTable
Technical Data Sheet
Download PDF

3219794 — STRAP,WEBBING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3219794: STRAP,WEBBING.

The STRAP,WEBBING is a the manufacturer industrial component. Key specifications include width: 1.0000 INCHES NOMINAL IN, length: 48.0000 INCHES NOMINAL IN, end_type: BOTH W/ATTACHMENTS LOCATION NOT OTHERWISE SPECIFIED, material: COTTON AND PLASTIC POLYAMIDE NYLON LOCATION NOT OTHERWISE SPECIFIED, pin_diameter: 0.120 INCHES NOMINAL IN, fastener_type: BUCKLE OR END CLIP LOCATION NOT OTHERWISE SPECIFIED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-432-2238, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3219794
NSN: 5340-01-432-2238
NIINs: 014322238, 014830094, 014830854
FSC: 5340 — Hardware, Commercial
CAGE: 96214 — RAYTHEON COMPANY DBA RAYTHEON (USA)
SPECIFICATIONS
width1.0000 INCHES NOMINAL IN
length48.0000 INCHES NOMINAL IN
end_typeBOTH W/ATTACHMENTS LOCATION NOT OTHERWISE SPECIFIED
materialCOTTON AND PLASTIC POLYAMIDE NYLON LOCATION NOT OTHERWISE SPECIFIED
pin_diameter0.120 INCHES NOMINAL IN
fastener_typeBUCKLE OR END CLIP LOCATION NOT OTHERWISE SPECIFIED
overall_length6.000 INCHES NOMINAL IN
performance_typeNOT RATED
pin_removabilityNONREMOVABLE
special_features0.050 INCH THICK HINGES REQUIRE NUMBER 10 SCREWS IN
style_designatorBUTT
covering_locationINNER
NSN5340-01-432-2238
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3219794 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
END CLIP STYLE DESIGNATOR: END CLIP
•
LENGTH: 48.0000 INCHES NOMINAL IN
•
BUCKLE STYLE DESIGNATOR: NOTCHED EDGE
•
FASTENER TYPE: BUCKLE OR END CLIP LOCATION NOT OTHERWISE SPECIFIED
•
COLOR: TAN
•
WIDTH: 1.0000 INCHES NOMINAL IN
•
MATERIAL: COTTON AND PLASTIC POLYAMIDE NYLON LOCATION NOT OTHERWISE SPECIFIED
•
END TYPE: BOTH W/ATTACHMENTS LOCATION NOT OTHERWISE SPECIFIED
TECHNICAL CHARACTERISTICS
END CLIP STYLE DESIGNATOREND CLIP
LENGTH48.0000 INCHES NOMINAL IN
BUCKLE STYLE DESIGNATORNOTCHED EDGE
FASTENER TYPEBUCKLE OR END CLIP LOCATION NOT OTHERWISE SPECIFIED
COLORTAN
WIDTH1.0000 INCHES NOMINAL IN
MATERIALCOTTON AND PLASTIC POLYAMIDE NYLON LOCATION NOT OTHERWISE SPECIFIED
END TYPEBOTH W/ATTACHMENTS LOCATION NOT OTHERWISE SPECIFIED
SUBSTITUTES & CROSS-REFERENCES 3
370ST161Reference document
Same NSN cross-reference
Reference document — Secondary reference
3705T162Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3705T161Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 3219794?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3219794?
3219794 is a STRAP,WEBBING.
What parts can replace 3219794?
There are 3 known substitutes for 3219794: 370ST161, 3705T162, 3705T161. Substitute compatibility should be verified for your specific system.
What is the NSN for 3219794?
3219794 is cataloged in the U.S. Government catalog under NSN 5340-01-432-2238. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3219794