PartsTable / MRO / 32152D
32152D
✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The FUSE,ENCLOSED LINK is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 3.443 INCHES NOMINAL IN, center_hole_diameter: 3.213 INCHES MINIMUM AND 3.261 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-167-5138, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO →
MRO_GENERAL →
32152D
NSN: 5331-00-167-5138 FSC: 5331 — O-RINGCAGE: 07270 — MOOG INC. DBA AMPAC-ISP CORP (USA)
SPECIFICATIONS
material RUBBER FLUOROCARBON CLASS FPM hardness_rating 75.0 SHORE DUROMETER A NOMINAL outside_diameter 3.443 INCHES NOMINAL IN center_hole_diameter 3.213 INCHES MINIMUM AND 3.261 INCHES MAXIMUM IN elongation_percentage 125 MAXIMUM cross-sectional_height 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN NSN 5331-00-167-5138
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 32152D
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL: RUBBER FLUOROCARBON CLASS FPM
• ELONGATION PERCENTAGE: 125 MAXIMUM
• OUTSIDE DIAMETER: 3.443 INCHES NOMINAL IN
• CENTER HOLE DIAMETER: 3.213 INCHES MINIMUM AND 3.261 INCHES MAXIMUM IN
• HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
• CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL RUBBER FLUOROCARBON CLASS FPM ELONGATION PERCENTAGE 125 MAXIMUM OUTSIDE DIAMETER 3.443 INCHES NOMINAL IN CENTER HOLE DIAMETER 3.213 INCHES MINIMUM AND 3.261 INCHES MAXIMUM IN HARDNESS RATING 75.0 SHORE DUROMETER A NOMINAL CROSS-SECTIONAL HEIGHT 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
E381BPC1 Interchangeable interchangeable cross-reference
interchangeable
30136 Interchangeable interchangeable cross-reference
interchangeable
30-210 Interchangeable interchangeable cross-reference
interchangeable
MS9388-152 Interchangeable interchangeable cross-reference
interchangeable
NST-2 Interchangeable interchangeable cross-reference
interchangeable
TI070003 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 32152D?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 32152D?
32152D is a FUSE,ENCLOSED LINK. It is classified as a MRO (MRO_GENERAL).
What parts can replace 32152D?
There are 25 known substitutes for 32152D: E381BPC1, 30136, 30-210 and 22 more. Substitute compatibility should be verified for your specific system.
Is 32152D still available?
32152D is currently cancelled.