PartsTable
Technical Data Sheet
Download PDF

3214474 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3214474: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, end_radius: 0.563 INCHES NOMINAL IN, hole_diameter: 0.563 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.125 INCHES NOMINAL IN, overall_length: 3.875 INCHES NOMINAL IN, cross-sectional_thickness: 0.013 INCHES MINIMUM AND 0.017 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-126-2529, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3214474
NSN: 5330-00-126-2529
FSC: 5330 — Packing and Gasket Materials
CAGE: 55380 — HATCH & KIRK, INC. (USA)
SPECIFICATIONS
materialCELLULOSE OVERALL
end_radius0.563 INCHES NOMINAL IN
hole_diameter0.563 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.125 INCHES NOMINAL IN
overall_length3.875 INCHES NOMINAL IN
cross-sectional_thickness0.013 INCHES MINIMUM AND 0.017 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
bolt_hole_centerline_to_nearest_edge_distance0.563 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_length2.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-126-2529
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3214474 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.013 INCHES MINIMUM AND 0.017 INCHES MAXIMUM IN
•
END RADIUS: 0.563 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE: 0.563 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 2.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: CELLULOSE OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.013 INCHES MINIMUM AND 0.017 INCHES MAXIMUM IN
END RADIUS0.563 INCHES NOMINAL IN
OVERALL LENGTH3.875 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH1.125 INCHES NOMINAL IN
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE0.563 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALCELLULOSE OVERALL
HOLE DIAMETER0.563 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 2
3236304Reference document
Same NSN cross-reference
Reference document — Secondary reference
3245591Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3214474?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3214474?
3214474 is a GASKET.
What parts can replace 3214474?
There are 2 known substitutes for 3214474: 3236304, 3245591. Substitute compatibility should be verified for your specific system.
What is the NSN for 3214474?
3214474 is cataloged in the U.S. Government catalog under NSN 5330-00-126-2529. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3214474