PartsTable
Technical Data Sheet
Download PDF

3212BAXR1A — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

3212BAXR1A: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 2.3616 INCHES MINIMUM AND 2.3622 INCHES MAXIMUM IN, overall_width: 0.8601 INCHES MINIMUM AND 0.8661 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-056-0031, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3212BAXR1A
NSN: 3110-01-056-0031
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter2.3616 INCHES MINIMUM AND 2.3622 INCHES MAXIMUM IN
overall_width0.8601 INCHES MINIMUM AND 0.8661 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
special_featuresOUTER RING OD CORNERS TO CLEAR 0.0200 IN. MAX FILLET RADIUS IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter4.3301 INCHES MINIMUM AND 4.3307 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
NSN3110-01-056-0031
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3212BAXR1A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 4.3301 INCHES MINIMUM AND 4.3307 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.8601 INCHES MINIMUM AND 0.8661 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER4.3301 INCHES MINIMUM AND 4.3307 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SPECIAL FEATURESOUTER RING OD CORNERS TO CLEAR 0.0200 IN. MAX FILLET RADIUS IN
BORE DIAMETER2.3616 INCHES MINIMUM AND 2.3622 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
23041146Reference document
Same NSN cross-reference
Reference document — Secondary reference
908215Reference document
Same NSN cross-reference
Reference document — Secondary reference
SKF6212VB354Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3212BAXR1A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3212BAXR1A?
3212BAXR1A is a BEARING,BALL,ANNULAR.
What parts can replace 3212BAXR1A?
There are 3 known substitutes for 3212BAXR1A: 23041146, 908215, SKF6212VB354. Substitute compatibility should be verified for your specific system.
What is the NSN for 3212BAXR1A?
3212BAXR1A is cataloged in the U.S. Government catalog under NSN 3110-01-056-0031. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3212BAXR1A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.