PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3205XR3CJ
3205XR3CJ ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.9843 INCHES NOMINAL IN, overall_width: 0.5906 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-045-8427, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3205XR3CJ
NSN: 3110-01-045-8427
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.9843 INCHES NOMINAL IN
overall_width0.5906 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter2.0472 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.3
NSN3110-01-045-8427
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3205XR3CJ · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIALGREASE
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.3
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
MATERIALSTEEL OVERALL
OVERALL WIDTH0.5906 INCHES NOMINAL IN
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL OUTSIDE DIAMETER2.0472 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
BG6205CO3Interchangeable
interchangeable cross-reference
interchangeable
6205Interchangeable
interchangeable cross-reference
interchangeable
799B020G02Interchangeable
interchangeable cross-reference
interchangeable
S6205Interchangeable
interchangeable cross-reference
interchangeable
QD613AInterchangeable
interchangeable cross-reference
interchangeable
WUC14AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3205XR3CJ?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3205XR3CJ?
3205XR3CJ is a BEARING,BALL,ANNULAR.
What parts can replace 3205XR3CJ?
There are 17 known substitutes for 3205XR3CJ: BG6205CO3, 6205, 799B020G02 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3205XR3CJ?
3205XR3CJ is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-045-8427. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3205XR3CJ

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026