PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 32036PC15
32036PC15 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.750 INCHES NOMINAL IN, housing_bore_diameter: 8.250 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 6.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-178-3741, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
32036PC15
NSN: 5330-00-178-3741
FSC: 5330
CAGE: 31577 — JAEGER MACHINE CO (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.750 INCHES NOMINAL IN
housing_bore_diameter8.250 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter6.750 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-178-3741
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 32036PC15 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT DIAMETER: 6.750 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
CASE STYLE: SQUARE
•
HOUSING BORE DIAMETER: 8.250 INCHES NOMINAL IN
•
SEAL WIDTH: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER6.750 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CASE STYLESQUARE
HOUSING BORE DIAMETER8.250 INCHES NOMINAL IN
MATERIALSTEEL CASE
SEAL WIDTH0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
1025FX1Interchangeable
interchangeable cross-reference
interchangeable
440592Interchangeable
interchangeable cross-reference
interchangeable
5D470Interchangeable
interchangeable cross-reference
interchangeable
1626Interchangeable
interchangeable cross-reference
interchangeable
4077Interchangeable
interchangeable cross-reference
interchangeable
8765Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 32036PC15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 32036PC15?
32036PC15 is a SEAL,PLAIN ENCASED.
What parts can replace 32036PC15?
There are 17 known substitutes for 32036PC15: 1025FX1, 440592, 5D470 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 32036PC15?
32036PC15 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-178-3741. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 32036PC15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026