PartsTable
Technical Data Sheet
Download PDF

32010 — CONNECTOR BODY,RECEPTACLE,ELECTR

✓ Government record, cited
Lena · MRO · MRO_GENERAL
PRODUCT OVERVIEW

32010: CONNECTOR BODY,RECEPTACLE,ELECTR.

CONNECTOR BODY,RECEPTACLE,ELECTR. Key specifications include phase: THREE, length: 36.000 INCHES NOMINAL IN, end_type: SINGLE ARMED, material: POLYGLACTIN 910 SUTURE, sterility: STERILE, body_style: STRAIGHT SHAPE, INTERNAL COUPLING. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-054-6940, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 32010
NSN: 5331-00-054-6940
NIINs: 000546940, 001978678, 004027184, 004498463, 011590921, 013520664, 014187123, 015028396, 016040607, 016585144, 016653034, 016654182
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
phaseTHREE
length36.000 INCHES NOMINAL IN
end_typeSINGLE ARMED
materialPOLYGLACTIN 910 SUTURE
sterilitySTERILE
body_styleSTRAIGHT SHAPE, INTERNAL COUPLING
shell_typeSOLID
speed_typeTHREE
thread_class2B
usage_designSHIP
largest_width1.125 INCHES SINGLE END IN
overall_width1.125 INCHES IN
NSN5331-00-054-6940
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 32010 MFR: Lena ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.387 INCHES NOMINAL IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 1.103 INCHES MINIMUM AND 1.115 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.387 INCHES NOMINAL IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER1.103 INCHES MINIMUM AND 1.115 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 10
028-04353Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
1000-011PC21Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
DS947032CPIECE3Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
PRP568-216Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
ARP568-216MILP5 516-70DURNReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
ARP568-286MILP5 516-70Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 32010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 32010?
32010 is a CONNECTOR BODY,RECEPTACLE,ELECTR manufactured by Lena. It is classified as a MRO (MRO_GENERAL).
What parts can replace 32010?
There are 10 known substitutes for 32010: 028-04353, 1000-011PC21, DS947032CPIECE3 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 32010?
32010 is cataloged in the U.S. Government catalog under NSN 5331-00-054-6940. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 32010

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.