PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3200633000
3200633000 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER OR LEATHER SEALING ELEMENT, case_style: SQUARE, seal_width: 0.250 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF, outside_diameter: 2.441 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-020-9680, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3200633000
NSN: 5330-01-020-9680
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER OR LEATHER SEALING ELEMENT
case_styleSQUARE
seal_width0.250 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
outside_diameter2.441 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter2.441 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.375 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-01-020-9680
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3200633000 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
TEMP RATING: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
•
ACCOMMODATED SHAFT DIAMETER: 1.375 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
•
OUTSIDE DIAMETER: 2.441 INCHES NOMINAL IN
•
MATERIAL: RUBBER OR LEATHER SEALING ELEMENT
•
HOUSING BORE DIAMETER: 2.441 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
TEMP RATING-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
ACCOMMODATED SHAFT DIAMETER1.375 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
OUTSIDE DIAMETER2.441 INCHES NOMINAL IN
MATERIALRUBBER OR LEATHER SEALING ELEMENT
HOUSING BORE DIAMETER2.441 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
919483-18Interchangeable
interchangeable cross-reference
interchangeable
13769Interchangeable
interchangeable cross-reference
interchangeable
32081Interchangeable
interchangeable cross-reference
interchangeable
13796Interchangeable
interchangeable cross-reference
interchangeable
1M263Interchangeable
interchangeable cross-reference
interchangeable
204-012-001MUSC1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3200633000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3200633000?
3200633000 is a SEAL,PLAIN ENCASED.
What parts can replace 3200633000?
There are 16 known substitutes for 3200633000: 919483-18, 13769, 32081 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3200633000?
3200633000 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-020-9680. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3200633000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026