PartsTable
Technical Data Sheet
Download PDF

3200590 — SEAT,HELICAL COMPRESSION SPRING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3200590: SEAT,HELICAL COMPRESSION SPRING.

SEAT,HELICAL COMPRESSION SPRING. Key specifications include material: STEEL, design_type: SOLID, end_diameter: 0.7190 INCHES NOMINAL IN, bore_diameter: 0.4370 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN, overall_height: 0.3125 INCHES NOMINAL IN, special_features: MATL-STEEL QQ-S-624,FS3135;NOT CASEHARDENED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-817-1156, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3200590
NSN: 5340-00-817-1156
FSC: 5340 — Hardware, Commercial
CAGE: 55380 — HATCH & KIRK, INC. (USA)
SPECIFICATIONS
materialSTEEL
design_typeSOLID
end_diameter0.7190 INCHES NOMINAL IN
bore_diameter0.4370 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN
overall_height0.3125 INCHES NOMINAL IN
special_featuresMATL-STEEL QQ-S-624,FS3135;NOT CASEHARDENED
bore_taper_in_deg10.0
countersink_diameter0.5310 INCHES NOMINAL IN
fsc_application_dataAIR STARTER GROUP,DIESEL ENGINE
countersink_angle_in_deg45.0
NSN5340-00-817-1156
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3200590 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COUNTERSINK ANGLE IN DEG: 45.0
•
FSC APPLICATION DATA: AIR STARTER GROUP,DIESEL ENGINE
•
END DIAMETER: 0.7190 INCHES NOMINAL IN
•
COUNTERSINK DIAMETER: 0.5310 INCHES NOMINAL IN
•
DESIGN TYPE: SOLID
•
BORE TAPER IN DEG: 10.0
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.3125 INCHES NOMINAL IN
COUNTERSINK ANGLE IN DEG45.0
FSC APPLICATION DATAAIR STARTER GROUP,DIESEL ENGINE
END DIAMETER0.7190 INCHES NOMINAL IN
COUNTERSINK DIAMETER0.5310 INCHES NOMINAL IN
DESIGN TYPESOLID
BORE TAPER IN DEG10.0
SPECIAL FEATURESMATL-STEEL QQ-S-624,FS3135;NOT CASEHARDENED
BORE DIAMETER0.4370 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN
MATERIALSTEEL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 3200590?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3200590?
3200590 is a SEAT,HELICAL COMPRESSION SPRING.
What is the NSN for 3200590?
3200590 is cataloged in the U.S. Government catalog under NSN 5340-00-817-1156. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3200590