PartsTable
Technical Data Sheet
Download PDF

32000127 — PLATE,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

32000127: PLATE,MOUNTING.

The PLATE,MOUNTING is a the manufacturer industrial component. Key specifications include shape: RECTANGULAR W/ROUNDED CORNERS, width: 2.750 INCHES NOMINAL IN, length: 3.880 INCHES NOMINAL IN, material: ALUMINUM ALLOY, thickness: 0.552 INCHES MINIMUM AND 0.567 INCHES MAXIMUM IN, corner_radius: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-605-8118, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
32000127
NSN: 5340-01-605-8118
FSC: 5340 — Hardware, Commercial
CAGE: 24995 — BECKLIN HOLDINGS, INC. (USA)
SPECIFICATIONS
shapeRECTANGULAR W/ROUNDED CORNERS
width2.750 INCHES NOMINAL IN
length3.880 INCHES NOMINAL IN
materialALUMINUM ALLOY
thickness0.552 INCHES MINIMUM AND 0.567 INCHES MAXIMUM IN
corner_radius0.250 INCHES NOMINAL IN
surface_treatmentANODIZE
mounting_hole_quantity5
end_item_identification4920-01-465-7013
part_name_assigned_by_controlling_agencySTACKING FOOT
NSN5340-01-605-8118
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 32000127 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 5
•
CORNER RADIUS: 0.250 INCHES NOMINAL IN
•
LENGTH: 3.880 INCHES NOMINAL IN
•
SHAPE: RECTANGULAR W/ROUNDED CORNERS
•
SURFACE TREATMENT: ANODIZE
•
WIDTH: 2.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY5
CORNER RADIUS0.250 INCHES NOMINAL IN
LENGTH3.880 INCHES NOMINAL IN
SHAPERECTANGULAR W/ROUNDED CORNERS
SURFACE TREATMENTANODIZE
WIDTH2.750 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYSTACKING FOOT
END ITEM IDENTIFICATION4920-01-465-7013
MATERIALALUMINUM ALLOY
THICKNESS0.552 INCHES MINIMUM AND 0.567 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
6014426-001Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 32000127?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 32000127?
32000127 is a PLATE,MOUNTING.
What parts can replace 32000127?
There is 1 known substitute for 32000127: 6014426-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 32000127?
32000127 is cataloged in the U.S. Government catalog under NSN 5340-01-605-8118. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 32000127