PartsTable
Technical Data Sheet
Download PDF

32-650-0703 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

32-650-0703: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.440 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, length: 1.010 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN, material: STEEL COMP 1065 OVERALL, hole_diameter: 0.159 INCHES NOMINAL IN, overall_height: 1.632 INCHES NOMINAL IN, smallest_width: 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-759-8326, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
32-650-0703
NSN: 5340-00-759-8326
FSC: 5340 — Hardware, Commercial
CAGE: 72429 — MISSION SYSTEMS DAVENPORT INC. (USA)
SPECIFICATIONS
width0.440 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
length1.010 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN
materialSTEEL COMP 1065 OVERALL
hole_diameter0.159 INCHES NOMINAL IN
overall_height1.632 INCHES NOMINAL IN
smallest_width0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
mounting_methodDIMPLED HOLE
surface_treatmentCADMIUM OVERALL
material_thickness0.032 INCHES NOMINAL IN
distance_from_loop_center_to_end1.000 INCHES MINIMUM AND 1.060 INCHES MAXIMUM IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-759-8326
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 32-650-0703 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.010 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: DIMPLED HOLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
SMALLEST WIDTH: 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 1.000 INCHES MINIMUM AND 1.060 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.632 INCHES NOMINAL IN
LENGTH1.010 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHODDIMPLED HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
SMALLEST WIDTH0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END1.000 INCHES MINIMUM AND 1.060 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
WIDTH0.440 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 32-650-0703?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 32-650-0703?
32-650-0703 is a CLIP,SPRING TENSION.
What is the NSN for 32-650-0703?
32-650-0703 is cataloged in the U.S. Government catalog under NSN 5340-00-759-8326. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 32-650-0703

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.