PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 32-58414-5
32-58414-5 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The GROMMET,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, groove_width: 0.160 INCHES NOMINAL IN, grommet_style: ROUND, hole_diameter: 3.110 INCHES NOMINAL IN, overall_height: 0.500 INCHES NOMINAL IN, flange_thickness: 0.170 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-059-3310, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
32-58414-5
NSN: 5325-00-059-3310
FSC: 5325
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
groove_width0.160 INCHES NOMINAL IN
grommet_styleROUND
hole_diameter3.110 INCHES NOMINAL IN
overall_height0.500 INCHES NOMINAL IN
flange_thickness0.170 INCHES NOMINAL IN
features_providedCOOLANT RESISTANT AND OIL RESISTANT
groove_outside_diameter3.620 INCHES NOMINAL IN
grommet_construction_typeSOLID
large_flange_outside_diameter4.200 INCHES NOMINAL IN
material_document_and_classificationA-A-59588, CL 3, GR 50 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5325-00-059-3310
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 32-58414-5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GROMMET CONSTRUCTION TYPE: SOLID
•
GROOVE WIDTH: 0.160 INCHES NOMINAL IN
•
LARGE FLANGE OUTSIDE DIAMETER: 4.200 INCHES NOMINAL IN
•
FEATURES PROVIDED: COOLANT RESISTANT AND OIL RESISTANT
•
GROMMET STYLE: ROUND
•
FLANGE THICKNESS: 0.170 INCHES NOMINAL IN
•
HOLE DIAMETER: 3.110 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
GROMMET CONSTRUCTION TYPESOLID
GROOVE WIDTH0.160 INCHES NOMINAL IN
LARGE FLANGE OUTSIDE DIAMETER4.200 INCHES NOMINAL IN
OVERALL HEIGHT0.500 INCHES NOMINAL IN
FEATURES PROVIDEDCOOLANT RESISTANT AND OIL RESISTANT
GROMMET STYLEROUND
FLANGE THICKNESS0.170 INCHES NOMINAL IN
HOLE DIAMETER3.110 INCHES NOMINAL IN
GROOVE OUTSIDE DIAMETER3.620 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONA-A-59588, CL 3, GR 50 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
1668439-28Interchangeable
interchangeable cross-reference
interchangeable
Z4015Interchangeable
interchangeable cross-reference
interchangeable
1635AS711-1Interchangeable
interchangeable cross-reference
interchangeable
00052 ST 1Interchangeable
interchangeable cross-reference
interchangeable
Z200Interchangeable
interchangeable cross-reference
interchangeable
91100Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 32-58414-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 32-58414-5?
32-58414-5 is a GROMMET,NONMETALLIC.
What parts can replace 32-58414-5?
There are 24 known substitutes for 32-58414-5: 1668439-28, Z4015, 1635AS711-1 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 32-58414-5?
32-58414-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-059-3310. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 32-58414-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026