PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 32-31465 ITEM 15
32-31465 ITEM 15 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON LOCKING FEATURE, head_style: FLAT CHAMFER, head_height: 0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.550 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN, thread_length: 1.250 INCHES MINIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-104-5078, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
32-31465 ITEM 15
NSN: 5305-00-104-5078
FSC: 5305
CAGE: 07270 — MOOG INC. DBA AMPAC-ISP CORP (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON LOCKING FEATURE
head_styleFLAT CHAMFER
head_height0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.550 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
thread_length1.250 INCHES MINIMUM IN
fastener_length3.969 INCHES MINIMUM AND 4.031 INCHES MAXIMUM IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
locking_featurePATCH OR PELLET OR STRIP THREADS
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE FASTENER
width_across_flats0.312 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
NSN5305-00-104-5078
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 32-31465 ITEM 15 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
WIDTH ACROSS FLATS: 0.312 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
•
FASTENER LENGTH: 3.969 INCHES MINIMUM AND 4.031 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.550 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
•
MINIMUM YIELD STRENGTH: 130000 POUNDS PER SQUARE INCH LBS
•
MATERIAL: PLASTIC POLYAMIDE NYLON LOCKING FEATURE
•
LOCKING FEATURE: PATCH OR PELLET OR STRIP THREADS
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
WIDTH ACROSS FLATS0.312 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
FASTENER LENGTH3.969 INCHES MINIMUM AND 4.031 INCHES MAXIMUM IN
HEAD DIAMETER0.550 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
MINIMUM YIELD STRENGTH130000 POUNDS PER SQUARE INCH LBS
MATERIALPLASTIC POLYAMIDE NYLON LOCKING FEATURE
LOCKING FEATUREPATCH OR PELLET OR STRIP THREADS
MATERIALSTEEL FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
2-300-158-01Interchangeable
interchangeable cross-reference
interchangeable
5-133V747-75Interchangeable
interchangeable cross-reference
interchangeable
60-13074Interchangeable
interchangeable cross-reference
interchangeable
31332Interchangeable
interchangeable cross-reference
interchangeable
6221Interchangeable
interchangeable cross-reference
interchangeable
17-68149Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 32-31465 ITEM 15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 32-31465 ITEM 15?
32-31465 ITEM 15 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 32-31465 ITEM 15?
There are 12 known substitutes for 32-31465 ITEM 15: 2-300-158-01, 5-133V747-75, 60-13074 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 32-31465 ITEM 15?
32-31465 ITEM 15 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-104-5078. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 32-31465 ITEM 15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026