PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 32-03003
32-03003 ✓ Verified by PartsTable
Case Logic · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Rotating folio spins 360° for portrait and landscape viewing.<br><br>- Hardshell rotates to support portrait and landscape viewing<br>- Adjustable viewing angles<br>- Soft, suede-like interior lining protects screen during transport<br>- Durable, molded polycarbonate shell<br>- Secure snap closure<br>- Unobstructed access to ports and controls This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-6369, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
32-03003
NSN: 5330-00-291-6369
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.437 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
housing_bore_diameter2.437 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.188 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-291-6369
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 32-03003 MFR: Case Logic ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.437 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
HOUSING BORE DIAMETER: 2.437 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT DIAMETER: 1.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
CASE STYLESQUARE
SEAL WIDTH0.437 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
HOUSING BORE DIAMETER2.437 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER1.188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
B94.11MInterchangeable
interchangeable cross-reference
interchangeable
50380Interchangeable
interchangeable cross-reference
interchangeable
1529AInterchangeable
interchangeable cross-reference
interchangeable
60359-001Interchangeable
interchangeable cross-reference
interchangeable
60359Interchangeable
interchangeable cross-reference
interchangeable
5216Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 32-03003?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 32-03003?
32-03003 is a SEAL,PLAIN ENCASED manufactured by Case Logic.
What parts can replace 32-03003?
There are 18 known substitutes for 32-03003: B94.11M, 50380, 1529A and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 32-03003?
32-03003 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-6369. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 32-03003

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026