PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 31996
31996 ✓ Verified by PartsTable
Legrand · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include color: VIOLET, length: 27.000 INCHES NOMINAL IN, end_type: SINGLE ARMED, material: POLYGLACTIN 910 SUTURE, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, sterility: STERILE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3707, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
31996
NSN: 3110-00-100-3707
FSC: 3110
CAGE: 10695 — TAYLOR-DUNN CORPORATION DBA METRO CROWN INTERNATIONAL (USA)
SPECIFICATIONS
colorVIOLET
length27.000 INCHES NOMINAL IN
end_typeSINGLE ARMED
materialPOLYGLACTIN 910 SUTURE
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
sterilitySTERILE
body_styleBARRIER TYPE
cone_width0.8480 INCHES NOMINAL IN
bore_diameter0.8120 INCHES NOMINAL IN
coil_quantity5
base_thickness0.462 INCHES IN
inside_diameter0.438 INCHES NOMINAL IN
NSN3110-00-100-3707
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 31996 · Legrand ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.8120 INCHES NOMINAL IN
•
CONE WIDTH: 0.8480 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.8120 INCHES NOMINAL IN
CONE WIDTH0.8480 INCHES NOMINAL IN
SPECIAL FEATURES0.0620 IN. BY 45 DEG CHAMFER BACK-FACE CORNER RADIUS IN
CONE CORNER RADIUS0.0620 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
FV31-996Interchangeable
interchangeable cross-reference
interchangeable
31-996Interchangeable
interchangeable cross-reference
interchangeable
09081Interchangeable
interchangeable cross-reference
interchangeable
27L1-2Interchangeable
interchangeable cross-reference
interchangeable
J328HInterchangeable
interchangeable cross-reference
interchangeable
POLYGLACTIN 910Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 31996?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 31996?
31996 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Legrand.
What parts can replace 31996?
There are 9 known substitutes for 31996: FV31-996, 31-996, 09081 and 6 more. Substitute compatibility should be verified for your specific system.
Is 31996 still available?
31996 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 31996

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026