PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 319696-679
319696-679 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include bore_shape: STRAIGHT, bore_diameter: 20.00 MILLIMETERS NOMINAL MM, overall_width: 0.7480 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND, inner_ring_width: 0.7090 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-4225, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
319696-679
NSN: 3110-00-156-4225
FSC: 3110
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
bore_shapeSTRAIGHT
bore_diameter20.00 MILLIMETERS NOMINAL MM
overall_width0.7480 INCHES NOMINAL IN
seal_quantity1
load_directionRADIAL
surface_finishGROUND
inner_ring_width0.7090 INCHES NOMINAL IN
outer_ring_width0.7480 INCHES NOMINAL IN
lubrication_materialLUBRICANT
overall_outside_diameter52.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
NSN3110-00-156-4225
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 319696-679 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
OUTER RING WIDTH: 0.7480 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
•
SURFACE FINISH: GROUND
•
SEAL QUANTITY: 1
•
LOAD DIRECTION: RADIAL
•
INNER RING WIDTH: 0.7090 INCHES NOMINAL IN
•
LUBRICATION MATERIAL: LUBRICANT
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL FIT-UP DESIGNATIONSTANDARD
OUTER RING WIDTH0.7480 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
SEAL QUANTITY1
LOAD DIRECTIONRADIAL
INNER RING WIDTH0.7090 INCHES NOMINAL IN
LUBRICATION MATERIALLUBRICANT
STANDARD TOLERANCE DESIGNATIONABEC NO.1
OVERALL OUTSIDE DIAMETER52.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
CB8523Interchangeable
interchangeable cross-reference
interchangeable
7007587Interchangeable
interchangeable cross-reference
interchangeable
924067Interchangeable
interchangeable cross-reference
interchangeable
WX8604Interchangeable
Same NIIN cross-reference
interchangeable
WC8604Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 319696-679?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 319696-679?
319696-679 is a BEARING,BALL,ANNULAR.
What parts can replace 319696-679?
There are 5 known substitutes for 319696-679: CB8523, 7007587, 924067 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 319696-679?
319696-679 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-4225. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 319696-679

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026