PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 319696-636
319696-636 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 25.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 1.0000 INCHES NOMINAL IN, load_direction: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-4831, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
319696-636
NSN: 3110-00-156-4831
FSC: 3110
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter25.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MAXIMUM
overall_width1.0000 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
style_designatorLOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter62.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
nondefinitive_spec/std_data145 TYPE AND 00 GRADE
NSN3110-00-156-4831
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 319696-636 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: ANGULAR
•
BORE SHAPE: STRAIGHT
•
SURFACE FINISH: GROUND
•
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: INWARD CONVERGENT
•
LUBRICATION MATERIAL: GREASE
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONANGULAR
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
CONTACT ANGLE25.0 DEGREES MAXIMUM
STANDARD TOLERANCE DESIGNATIONABEC NO.1
INTERNAL FIT-UP DESIGNATIONSTANDARD
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONINWARD CONVERGENT
LUBRICATION MATERIALGREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
NONDEFINITIVE SPEC/STD DATA145 TYPE AND 00 GRADE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
RT3210Interchangeable
interchangeable cross-reference
interchangeable
SM9248Interchangeable
interchangeable cross-reference
interchangeable
64AX29Interchangeable
interchangeable cross-reference
interchangeable
6420Interchangeable
interchangeable cross-reference
interchangeable
DSF00006Interchangeable
interchangeable cross-reference
interchangeable
173067Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 319696-636?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 319696-636?
319696-636 is a BEARING,BALL,ANNULAR.
What parts can replace 319696-636?
There are 30 known substitutes for 319696-636: RT3210, SM9248, 64AX29 and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 319696-636?
319696-636 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-4831. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 319696-636

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026