PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 319696-584
319696-584 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 14.00 MILLIMETERS NOMINAL MM, overall_width: 8.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-6703, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
319696-584
NSN: 3110-00-156-6703
FSC: 3110
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter14.00 MILLIMETERS NOMINAL MM
overall_width8.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, MAGNETO TYPE, S EPARABLE
overall_outside_diameter35.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
nondefinitive_spec/std_data132 TYPE AND 00 GRADE
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-156-6703
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 319696-584 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
RETAINER FABRICATION METHOD: PRESSED
•
LOAD DIRECTION: RADIAL
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, MAGNETO TYPE, S EPARABLE
•
NONDEFINITIVE SPEC/STD DATA: 132 TYPE AND 00 GRADE
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONABEC NO.1
INTERNAL FIT-UP DESIGNATIONSTANDARD
RETAINER FABRICATION METHODPRESSED
LOAD DIRECTIONRADIAL
STYLE DESIGNATORCOUNTERBORED OUTER RING, MAGNETO TYPE, S EPARABLE
NONDEFINITIVE SPEC/STD DATA132 TYPE AND 00 GRADE
STYLE DESIGNATORCOUNTERBORED OUTER RING, MAGNETO TYPE, S EPARABLE
MATERIALSTEEL OVERALL
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONABEC NO.1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
E14Interchangeable
Lenovo Thinkpad E14
interchangeable
MS16704Interchangeable
interchangeable cross-reference
interchangeable
44253Interchangeable
interchangeable cross-reference
interchangeable
700867Interchangeable
interchangeable cross-reference
interchangeable
2132379-3Interchangeable
interchangeable cross-reference
interchangeable
15880Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 319696-584?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 319696-584?
319696-584 is a BEARING,BALL,ANNULAR.
What parts can replace 319696-584?
There are 26 known substitutes for 319696-584: E14, MS16704, 44253 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 319696-584?
319696-584 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-6703. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 319696-584

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026