PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 319615-2
319615-2 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,BEVEL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN, overall_width: 1.250 INCHES NOMINAL IN, major_thickness: 0.343 INCHES NOMINAL IN, minor_thickness: 0.156 INCHES NOMINAL IN, style_designator: BEVEL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-458-2386, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
319615-2
NSN: 5310-00-458-2386
FSC: 5310
CAGE: 80020 — NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION JOINT BASE JBMDL (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
overall_width1.250 INCHES NOMINAL IN
major_thickness0.343 INCHES NOMINAL IN
minor_thickness0.156 INCHES NOMINAL IN
style_designatorBEVEL
surface_treatmentCADMIUM OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
flat_side_distance_between_thick_and_thin_edges1.250 INCHES NOMINAL IN
NSN5310-00-458-2386
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 319615-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MAJOR THICKNESS: 0.343 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
FLAT SIDE DISTANCE BETWEEN THICK AND THIN EDGES: 1.250 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: BEVEL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH1.250 INCHES NOMINAL IN
MAJOR THICKNESS0.343 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
FLAT SIDE DISTANCE BETWEEN THICK AND THIN EDGES1.250 INCHES NOMINAL IN
HOLE DIAMETER0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
STYLE DESIGNATORBEVEL
MINOR THICKNESS0.156 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
60744Interchangeable
interchangeable cross-reference
interchangeable
481110PC3Interchangeable
interchangeable cross-reference
interchangeable
60744-2Interchangeable
interchangeable cross-reference
interchangeable
25-72007-3Interchangeable
interchangeable cross-reference
interchangeable
60871Interchangeable
interchangeable cross-reference
interchangeable
1854-0464Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 319615-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 319615-2?
319615-2 is a WASHER,BEVEL.
What parts can replace 319615-2?
There are 8 known substitutes for 319615-2: 60744, 481110PC3, 60744-2 and 5 more. Substitute compatibility should be verified for your specific system.
Is 319615-2 still available?
319615-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 319615-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026