PartsTable
Technical Data Sheet
Download PDF

319277 — BUMPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

319277: BUMPER.

The BUMPER is a the manufacturer industrial component. Key specifications include base_style: E14/20 - (SES), bulb_style: P (PEAR), voltage_rating: 240.000 VOLTS NOMINAL, wattage_rating: 40.000 WATTS, special_features: P45 BULB, CLEAR FINISH, ANY BURN POSITION, LAMP LUMINOUS FLUX 420 LM, HALOGEN LOW VOLTAGE, rated_average_life: HOURS. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-222-8763, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
319277
NSN: 5340-01-222-8763
NIINs: 012228763, 015781914
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
base_styleE14/20 - (SES)
bulb_styleP (PEAR)
voltage_rating240.000 VOLTS NOMINAL
wattage_rating40.000 WATTS
special_featuresP45 BULB, CLEAR FINISH, ANY BURN POSITION, LAMP LUMINOUS FLUX 420 LM, HALOGEN LOW VOLTAGE
rated_average_lifeHOURS
end_item_identificationOVEN LIGHTING
average_life_rating_in_hours1000.0
part_name_assigned_by_controlling_agencyAPPLIANCE 40W E14 240V P45 CL OV 1CT V
NSN5340-01-222-8763
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 319277 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE/TOP FLANGE DIAMETER: 2.300 INCHES MINIMUM AND 2.330 INCHES MAXIMUM IN
•
MATERIAL HARDNESS RATING: 60.0 DUROMETER NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6855, CLASS 2, GRADE 60 MIL SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL: RUBBER
•
HOLE DIAMETER: 1.770 INCHES MINIMUM AND 1.780 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.140 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
OUTSIDE/TOP FLANGE DIAMETER2.300 INCHES MINIMUM AND 2.330 INCHES MAXIMUM IN
MATERIAL HARDNESS RATING60.0 DUROMETER NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6855, CLASS 2, GRADE 60 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALRUBBER
HOLE DIAMETER1.770 INCHES MINIMUM AND 1.780 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
3197277Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 319277?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 319277?
319277 is a BUMPER.
What parts can replace 319277?
There is 1 known substitute for 319277: 3197277. Substitute compatibility should be verified for your specific system.
What is the NSN for 319277?
319277 is cataloged in the U.S. Government catalog under NSN 5340-01-222-8763. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 319277

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.