PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 31927
31927 ✓ Verified by PartsTable
Lindy · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

<b>Extends from just 0.2m up to 2m in length!</b><br>This high quality transparent USB cable, easily extends from its coiled length of 20cm to a maximum of 2m. It fully complies with the USB 2.0 specification allowing data transfer speeds of up to 480Mbit/sec. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-350-5746, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
31927
NSN: 5310-00-350-5746
FSC: 5310
CAGE: 03716 — T AND J INDUSTRIES INC (USA)
SPECIFICATIONS
phaseSINGLE SINGLE VOLTAGE
length18.667 INCHES NOMINAL IN
materialALUMINUM OVERALL
nut_styleHEXAGON
body_styleTUBULAR, STEPPED
nut_height0.500 INCHES NOMINAL IN
thread_class3B
heat_quantity1
thread_seriesUN
blade_quantity3
terminal_length12.000 INCHES NOMINAL IN
element_quantity1
NSN5310-00-350-5746
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 31927 · Lindy ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 3B
•
WIDTH ACROSS FLATS: 4.000 INCHES NOMINAL IN
•
THREAD SERIES: UN
•
NOMINAL THREAD SIZE: 3.250 INCHES IN
•
THREAD QUANTITY PER INCH: 12
•
BEARING SURFACE TYPE: CHAMFERED
•
THREAD DIRECTION: RIGHT-HAND
•
NUT HEIGHT: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS3B
WIDTH ACROSS FLATS4.000 INCHES NOMINAL IN
THREAD SERIESUN
NOMINAL THREAD SIZE3.250 INCHES IN
THREAD QUANTITY PER INCH12
BEARING SURFACE TYPECHAMFERED
THREAD DIRECTIONRIGHT-HAND
NUT HEIGHT0.500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
NUT STYLEHEXAGON
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
R3X1228Interchangeable
interchangeable cross-reference
interchangeable
R3X1473Interchangeable
interchangeable cross-reference
interchangeable
700013Interchangeable
interchangeable cross-reference
interchangeable
26335Interchangeable
interchangeable cross-reference
interchangeable
39127Interchangeable
interchangeable cross-reference
interchangeable
210-19082-42Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 31927?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 31927?
31927 is a HEATING ELEMENT,ELECTRICAL,NONIM manufactured by Lindy.
What parts can replace 31927?
There are 18 known substitutes for 31927: R3X1228, R3X1473, 700013 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 31927?
31927 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-350-5746. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 31927

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026