PartsTable
Technical Data Sheet
Download PDF

319-330-4411-06 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

319-330-4411-06: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include bore_shape: STRAIGHT, flange_width: 0.0340 INCHES MINIMUM AND 0.0360 INCHES MAXIMUM IN, bore_diameter: 0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN, overall_width: 0.1200 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-110-8867, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
319-330-4411-06
NSN: 3110-01-110-8867
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 50294 — NEW HAMPSHIRE BALL BEARINGS INC DIV PRECISION DIVISION (USA)
SPECIFICATIONS
bore_shapeSTRAIGHT
flange_width0.0340 INCHES MINIMUM AND 0.0360 INCHES MAXIMUM IN
bore_diameter0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
overall_width0.1200 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
special_featuresRACE CURVATURE 57 PCT; SPECIFIED LUBRICANT CENTRIFUGED
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0001 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
lubrication_materialOIL
flange_outside_diameter0.3570 INCHES MINIMUM AND 0.3640 INCHES MAXIMUM IN
NSN3110-01-110-8867
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 319-330-4411-06 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: OIL
•
INTERNAL CLEARANCE: 0.0001 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
•
FLANGE OUTSIDE DIAMETER: 0.3570 INCHES MINIMUM AND 0.3640 INCHES MAXIMUM IN
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALOIL
INTERNAL CLEARANCE0.0001 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
FLANGE OUTSIDE DIAMETER0.3570 INCHES MINIMUM AND 0.3640 INCHES MAXIMUM IN
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.1200 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
S5632FCHHP15LOC2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 319-330-4411-06?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 319-330-4411-06?
319-330-4411-06 is a BEARING,BALL,ANNULAR.
What parts can replace 319-330-4411-06?
There is 1 known substitute for 319-330-4411-06: S5632FCHHP15LOC2. Substitute compatibility should be verified for your specific system.
What is the NSN for 319-330-4411-06?
319-330-4411-06 is cataloged in the U.S. Government catalog under NSN 3110-01-110-8867. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 319-330-4411-06

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.