PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 319-130-3000
319-130-3000 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING INNER RING, bore_shape: STRAIGHT, bore_diameter: 0.1250 INCHES NOMINAL IN, overall_width: 0.1562 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-226-3366, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
319-130-3000
NSN: 3110-00-226-3366
FSC: 3110
CAGE: 1K426 — MOOG INC. DBA MOOG COMPONENTS GROUP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING INNER RING
bore_shapeSTRAIGHT
bore_diameter0.1250 INCHES NOMINAL IN
overall_width0.1562 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
special_featuresRETAINER FABRICATION METHOD IS PRESSED STEEL
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0001 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
overall_outside_diameter0.3750 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.3
NSN3110-00-226-3366
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 319-130-3000 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL CLEARANCE: 0.0001 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
•
MATERIAL: STEEL CORROSION RESISTING BALL
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.1562 INCHES NOMINAL IN
INTERNAL CLEARANCE0.0001 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.3
MATERIALSTEEL CORROSION RESISTING BALL
MATERIALSTEEL RETAINER
MATERIALSTEEL CORROSION RESISTING OUTER RING
MATERIALSTEEL CORROSION RESISTING INNER RING
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
RETAINER FABRICATION METHODPRESSED
OVERALL OUTSIDE DIAMETER0.3750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
R8FFAND0CCInterchangeable
interchangeable cross-reference
interchangeable
77R8XR1CInterchangeable
interchangeable cross-reference
interchangeable
S5PPF4G90Interchangeable
interchangeable cross-reference
interchangeable
FF-B-2844/05Interchangeable
interchangeable cross-reference
interchangeable
SR33PPDK36-74Interchangeable
interchangeable cross-reference
interchangeable
FFB2844/05AD1XXInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 319-130-3000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 319-130-3000?
319-130-3000 is a BEARING,BALL,ANNULAR.
What parts can replace 319-130-3000?
There are 16 known substitutes for 319-130-3000: R8FFAND0CC, 77R8XR1C, S5PPF4G90 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 319-130-3000?
319-130-3000 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-226-3366. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 319-130-3000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026