3175347-1 — SPRING,HELICAL,TORSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

3175347-1: SPRING,HELICAL,TORSION.

The SPRING,HELICAL,TORSION is a the manufacturer industrial component. Key specifications include end_style: STRAIGHT BEND END (RIGHT) OVERALL, end_length: 0.840 INCHES MINIMUM AND 0.860 INCHES MAXIMUM BOTH ENDS IN, coil_quantity: 30, inside_diameter: 0.374 INCHES NOMINAL IN, style_designator: SINGLE TORSION LEFT HAND, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5360-01-349-9191, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

3175347-1

NSN: 5360-01-349-9191
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 59364 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE - TEMPE (WEST WARNER ROAD) (USA)

SPECIFICATIONS

end_style	STRAIGHT BEND END (RIGHT) OVERALL
end_length	0.840 INCHES MINIMUM AND 0.860 INCHES MAXIMUM BOTH ENDS IN
coil_quantity	30
inside_diameter	0.374 INCHES NOMINAL IN
style_designator	SINGLE TORSION LEFT HAND
surface_treatment	PASSIVATE OVERALL
spring_free_length	2.370 INCHES MINIMUM AND 2.430 INCHES MAXIMUM IN
coil_helix_direction	RIGHT-HAND OR LEFT-HAND
end_angular_relationship	END W/LH HELIX OF COIL PARALLEL TO CENTER SECTION
spring_free_outside_diameter	0.450 INCHES NOMINAL IN
surface_treatment_document_and_classification	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
end_length_from_first_bend_to_second_bend_or_end	0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM OVERALL IN
NSN	5360-01-349-9191

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 0.450 INCHES NOMINAL IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

END STYLE: STRAIGHT BEND END (RIGHT) OVERALL

•

END LENGTH: 0.840 INCHES MINIMUM AND 0.860 INCHES MAXIMUM BOTH ENDS IN

•

STYLE DESIGNATOR: SINGLE TORSION LEFT HAND

•

SPRING FREE LENGTH: 2.370 INCHES MINIMUM AND 2.430 INCHES MAXIMUM IN

•

INSIDE DIAMETER: 0.374 INCHES NOMINAL IN

•

END LENGTH FROM FIRST BEND TO SECOND BEND OR END: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM OVERALL IN

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	0.450 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
END STYLE	STRAIGHT BEND END (RIGHT) OVERALL
END LENGTH	0.840 INCHES MINIMUM AND 0.860 INCHES MAXIMUM BOTH ENDS IN
STYLE DESIGNATOR	SINGLE TORSION LEFT HAND
SPRING FREE LENGTH	2.370 INCHES MINIMUM AND 2.430 INCHES MAXIMUM IN
INSIDE DIAMETER	0.374 INCHES NOMINAL IN
END LENGTH FROM FIRST BEND TO SECOND BEND OR END	0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM OVERALL IN
COIL QUANTITY	30
SURFACE TREATMENT	PASSIVATE OVERALL

OTHER ITEMS IN FSC 5360 — Coil, Flat, Leaf, and Wire Springs

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5360-00-001-1842 5360-00-001-1945 5360-00-001-2010 5360-00-001-3865 5360-00-001-3950 5360-00-001-4650 5360-00-001-4664 5360-00-001-4703

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 3175347-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 3175347-1?

3175347-1 is a SPRING,HELICAL,TORSION.

What is the NSN for 3175347-1?

3175347-1 is cataloged in the U.S. Government catalog under NSN 5360-01-349-9191. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

3175347-1 — SPRING,HELICAL,TORSION

Request a Quote — 3175347-1