PartsTable / COMPONENT / 31728-8
31728-8
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.167 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN, material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, special_features: COLOR BLACK, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-969-6501, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
31728-8
NSN: 5340-00-969-6501 FSC: 5340 CAGE: 06351 — MICROWAVE ENGINEERING CORPORATION (USA)
SPECIFICATIONS
diameter 0.167 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN material PLASTIC POLYAMIDE NYLON OVERALL overall_width 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN special_features COLOR BLACK style_designator SINGLE LOOP tongue_hole_type ROUND, UNTHREADED material_thickness 0.035 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN loop_inside_diameter 0.438 INCHES NOMINAL IN specification/standard_data 80205-NAS1397 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD material_document_and_classification L-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL distance_from_loop_center_to_tongue_end 0.720 INCHES NOMINAL IN center_to_center_distance_between_loop_and_mounting_hole 0.480 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN NSN 5340-00-969-6501
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 31728-8
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL THICKNESS: 0.035 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
• DISTANCE FROM LOOP CENTER TO TONGUE END: 0.720 INCHES NOMINAL IN
• SPECIFICATION/STANDARD DATA: 80205-NAS1397 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
• STYLE DESIGNATOR: SINGLE LOOP
• MATERIAL: PLASTIC POLYAMIDE NYLON OVERALL
• MATERIAL DOCUMENT AND CLASSIFICATION: L-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
• DIAMETER: 0.167 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.480 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS 0.035 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN DISTANCE FROM LOOP CENTER TO TONGUE END 0.720 INCHES NOMINAL IN SPECIFICATION/STANDARD DATA 80205-NAS1397 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD STYLE DESIGNATOR SINGLE LOOP MATERIAL PLASTIC POLYAMIDE NYLON OVERALL MATERIAL DOCUMENT AND CLASSIFICATION L-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL DIAMETER 0.167 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 0.480 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN LOOP INSIDE DIAMETER 0.438 INCHES NOMINAL IN OVERALL WIDTH 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
776 Upgraded Successor successor cross-reference
successor
0007260 Upgraded Successor successor cross-reference
successor
7164 Upgraded Successor successor cross-reference
successor
DS-936213 Upgraded Successor successor cross-reference
successor
G45P5152 Interchangeable interchangeable cross-reference
interchangeable
X1721 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 31728-8?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 31728-8?
31728-8 is a CLAMP,LOOP.
What parts can replace 31728-8?
There are 17 known substitutes for 31728-8: 776, 0007260, 7164 and 14 more. Substitute compatibility should be verified for your specific system.
Is 31728-8 still available?
31728-8 is currently cancelled.
Request a Quote — 31728-8