PartsTable
Technical Data Sheet
Download PDF

3167A — PLUG,EXPANSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3167A: PLUG,EXPANSION.

The PLUG,EXPANSION is a the manufacturer industrial component. Key specifications include height: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN, radius: 0.062 INCHES NOMINAL IN, material: COPPER ALLOY, outside_diameter: 1.133 INCHES NOMINAL IN, style_designator: TRAPPED CUP, smallest_diameter: 1.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-171-5165, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3167A
NSN: 5340-00-171-5165
FSC: 5340 — Hardware, Commercial
CAGE: 64104 — DRESSER, LLC (USA)
SPECIFICATIONS
height0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
radius0.062 INCHES NOMINAL IN
materialCOPPER ALLOY
outside_diameter1.133 INCHES NOMINAL IN
style_designatorTRAPPED CUP
smallest_diameter1.125 INCHES NOMINAL IN
material_thickness0.083 INCHES NOMINAL IN
NSN5340-00-171-5165
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3167A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RADIUS: 0.062 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.133 INCHES NOMINAL IN
•
STYLE DESIGNATOR: TRAPPED CUP
•
MATERIAL THICKNESS: 0.083 INCHES NOMINAL IN
•
HEIGHT: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY
•
SMALLEST DIAMETER: 1.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
RADIUS0.062 INCHES NOMINAL IN
OUTSIDE DIAMETER1.133 INCHES NOMINAL IN
STYLE DESIGNATORTRAPPED CUP
MATERIAL THICKNESS0.083 INCHES NOMINAL IN
HEIGHT0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY
SMALLEST DIAMETER1.125 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3167A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3167A?
3167A is a PLUG,EXPANSION.
What is the NSN for 3167A?
3167A is cataloged in the U.S. Government catalog under NSN 5340-00-171-5165. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3167A