PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3162061032
3162061032 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.480 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, thread_length: 0.250 INCHES NOMINAL IN, fastener_length: 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-237-0828, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3162061032
NSN: 5305-01-237-0828
FSC: 5305
CAGE: 64866 — FOUNDATION EQUIPMENT CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.480 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
thread_length0.250 INCHES NOMINAL IN
fastener_length0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
surface_treatmentANODIZE OVERALL
width_across_flats0.156 INCHES NOMINAL IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.250 INCHES IN
NSN5305-01-237-0828
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3162061032 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
HEAD DIAMETER: 0.480 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.250 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
THREAD QUANTITY PER INCH: 20
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
HEAD DIAMETER0.480 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
THREAD LENGTH0.250 INCHES NOMINAL IN
FASTENER LENGTH0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
SURFACE TREATMENTANODIZE OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD QUANTITY PER INCH20
THREAD DIRECTIONRIGHT-HAND
WIDTH ACROSS FLATS0.156 INCHES NOMINAL IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
IGE1016Interchangeable
interchangeable cross-reference
interchangeable
AL47Interchangeable
interchangeable cross-reference
interchangeable
4001546-3Interchangeable
interchangeable cross-reference
interchangeable
4001546Interchangeable
interchangeable cross-reference
interchangeable
24813Interchangeable
interchangeable cross-reference
interchangeable
154-6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3162061032?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3162061032?
3162061032 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 3162061032?
There are 17 known substitutes for 3162061032: IGE1016, AL47, 4001546-3 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3162061032?
3162061032 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-237-0828. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3162061032

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026