PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3162061006
3162061006 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,KEYWAY is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1213 OVERALL, hole_diameter: 0.375 INCHES NOMINAL IN, outside_diameter: 1.105 INCHES MINIMUM AND 1.107 INCHES MAXIMUM IN, special_features: ONE OUTSIDE CORNER CHAMFERED 45.0 DEG AND 0.095 IN. CHAMFER LENGTH IN, material_thickness: 0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN, internal_keyway_quantity: 12.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-231-5187, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3162061006
NSN: 5310-01-231-5187
FSC: 5310
CAGE: 64866 — FOUNDATION EQUIPMENT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 1213 OVERALL
hole_diameter0.375 INCHES NOMINAL IN
outside_diameter1.105 INCHES MINIMUM AND 1.107 INCHES MAXIMUM IN
special_featuresONE OUTSIDE CORNER CHAMFERED 45.0 DEG AND 0.095 IN. CHAMFER LENGTH IN
material_thickness0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
internal_keyway_quantity12
NSN5310-01-231-5187
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3162061006 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL KEYWAY QUANTITY: 12
•
MATERIAL: STEEL COMP 1213 OVERALL
•
MATERIAL THICKNESS: 0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.105 INCHES MINIMUM AND 1.107 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL KEYWAY QUANTITY12
MATERIALSTEEL COMP 1213 OVERALL
MATERIAL THICKNESS0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
SPECIAL FEATURESONE OUTSIDE CORNER CHAMFERED 45.0 DEG AND 0.095 IN. CHAMFER LENGTH IN
OUTSIDE DIAMETER1.105 INCHES MINIMUM AND 1.107 INCHES MAXIMUM IN
HOLE DIAMETER0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
031-020-02Interchangeable
interchangeable cross-reference
interchangeable
41818-21Interchangeable
interchangeable cross-reference
interchangeable
1817PInterchangeable
interchangeable cross-reference
interchangeable
TT17Interchangeable
interchangeable cross-reference
interchangeable
Q90Interchangeable
interchangeable cross-reference
interchangeable
3027Interchangeable
IBM - 9GB U160 10K 68pin Drive
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3162061006?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3162061006?
3162061006 is a WASHER,KEYWAY.
What parts can replace 3162061006?
There are 16 known substitutes for 3162061006: 031-020-02, 41818-21, 1817P and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3162061006?
3162061006 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-231-5187. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3162061006

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026