PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 316008-01
316008-01 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include alignment_type: RIGID, overall_height: 0.2490 INCHES NOMINAL IN, surface_finish: GROUND, style_designator: FLAT RACE SURFACE, IN LINE BALL RETAINER, overall_outside_diameter: 0.9380 INCHES NOMINAL IN, retainer_fabrication_method: MOLDED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-020-5287, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
316008-01
NSN: 3110-01-020-5287
FSC: 3110
CAGE: 97525 — TRANSICO, INC. DBA EECO SWITCH (USA)
SPECIFICATIONS
alignment_typeRIGID
overall_height0.2490 INCHES NOMINAL IN
surface_finishGROUND
style_designatorFLAT RACE SURFACE, IN LINE BALL RETAINER
overall_outside_diameter0.9380 INCHES NOMINAL IN
retainer_fabrication_methodMOLDED
thrust_directional_capability_designationSINGLE
NSN3110-01-020-5287
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 316008-01 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 0.9380 INCHES NOMINAL IN
•
RETAINER FABRICATION METHOD: MOLDED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: FLAT RACE SURFACE, IN LINE BALL RETAINER
TECHNICAL CHARACTERISTICS (FLIS)
ALIGNMENT TYPERIGID
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER0.9380 INCHES NOMINAL IN
RETAINER FABRICATION METHODMOLDED
OVERALL HEIGHT0.2490 INCHES NOMINAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORFLAT RACE SURFACE, IN LINE BALL RETAINER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
B5-6Interchangeable
interchangeable cross-reference
interchangeable
BP56Interchangeable
interchangeable cross-reference
interchangeable
B56.0Interchangeable
interchangeable cross-reference
interchangeable
GC12A-56Interchangeable
interchangeable cross-reference
interchangeable
SB-56Interchangeable
interchangeable cross-reference
interchangeable
SZA124-001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 316008-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 316008-01?
316008-01 is a BEARING,BALL,THRUST.
What parts can replace 316008-01?
There are 13 known substitutes for 316008-01: B5-6, BP56, B56.0 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 316008-01?
316008-01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-020-5287. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 316008-01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026