PartsTable
Technical Data Sheet
Download PDF

3159940 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3159940: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 7.250 INCHES NOMINAL IN, overall_length: 10.375 INCHES NOMINAL IN, bolt_hole_quantity: 18, cross-sectional_thickness: 0.031 INCHES NOMINAL IN, material_document_and_classification: 33+22 CAGEC 82796 MFR REF SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-291-4761, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3159940
NSN: 5330-00-291-4761
FSC: 5330 — Packing and Gasket Materials
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
hole_diameter0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width7.250 INCHES NOMINAL IN
overall_length10.375 INCHES NOMINAL IN
bolt_hole_quantity18
cross-sectional_thickness0.031 INCHES NOMINAL IN
material_document_and_classification33+22 CAGEC 82796 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-291-4761
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3159940 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 33+22 CAGEC 82796 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
BOLT HOLE QUANTITY: 18
•
HOLE DIAMETER: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION33+22 CAGEC 82796 MFR REF SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH10.375 INCHES NOMINAL IN
OVERALL WIDTH7.250 INCHES NOMINAL IN
BOLT HOLE QUANTITY18
HOLE DIAMETER0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 2
16101411Reference document
Same NSN cross-reference
Reference document — Secondary reference
ADH2436AReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3159940?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3159940?
3159940 is a GASKET.
What parts can replace 3159940?
There are 2 known substitutes for 3159940: 16101411, ADH2436A. Substitute compatibility should be verified for your specific system.
What is the NSN for 3159940?
3159940 is cataloged in the U.S. Government catalog under NSN 5330-00-291-4761. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3159940