PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3153646-6
3153646-6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5056 AND RUBBER SILICONE CLASS Q OVERALL, temp_rating: 0.0 FAHRENHEIT AND 257.0 FAHRENHEIT DEGF, hole_diameter: 0.130 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.312 INCHES NOMINAL IN, overall_length: 1.312 INCHES NOMINAL IN, hardness_rating: 60.0 SHORE DUROMETER A NOMINAL OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-292-3120, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3153646-6
NSN: 5330-00-292-3120
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialALUMINUM ALLOY 5056 AND RUBBER SILICONE CLASS Q OVERALL
temp_rating0.0 FAHRENHEIT AND 257.0 FAHRENHEIT DEGF
hole_diameter0.130 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.312 INCHES NOMINAL IN
overall_length1.312 INCHES NOMINAL IN
hardness_rating60.0 SHORE DUROMETER A NOMINAL OVERALL
style_designatorNON-CIRCULAR
aperture_diameter1.125 INCHES MINIMUM AND 1.141 INCHES MAXIMUM IN
bolt_hole_quantity4
fsc_application_dataCONNECTOR ELECTRICAL
outside_corner_radius0.125 INCHES NOMINAL IN
cross-sectional_thickness0.016 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
NSN5330-00-292-3120
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3153646-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE CORNER RADIUS: 0.125 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.125 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.130 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.016 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 1.125 INCHES MINIMUM AND 1.141 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS4182 ASSN STD SINGLE MATERIAL RESPONSE AND AMS 3302 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE CORNER RADIUS0.125 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.125 INCHES NOMINAL IN
HOLE DIAMETER0.130 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL THICKNESS0.016 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
OVERALL WIDTH1.312 INCHES NOMINAL IN
APERTURE DIAMETER1.125 INCHES MINIMUM AND 1.141 INCHES MAXIMUM IN
OVERALL LENGTH1.312 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS4182 ASSN STD SINGLE MATERIAL RESPONSE AND AMS 3302 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLEMETAL AND SYNTHETIC RUBBER
BOLT HOLE QUANTITY4
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
F4525Interchangeable
interchangeable cross-reference
interchangeable
436204-03Interchangeable
interchangeable cross-reference
interchangeable
8436868-3Interchangeable
interchangeable cross-reference
interchangeable
112737141Interchangeable
interchangeable cross-reference
interchangeable
42-80118Interchangeable
interchangeable cross-reference
interchangeable
42-90446Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3153646-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3153646-6?
3153646-6 is a GASKET.
What parts can replace 3153646-6?
There are 16 known substitutes for 3153646-6: F4525, 436204-03, 8436868-3 and 13 more. Substitute compatibility should be verified for your specific system.
Is 3153646-6 still available?
3153646-6 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3153646-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026