PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 31408
31408 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include end_item_identification: 6515-01-500-5926 INSTRUMENT AND IMPLANT SET,CANNULATED SCREWS, part_name_assigned_by_controlling_agency: SLEEVE HOLDING SCREWDRIVER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-222-8844, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
31408
NSN: 4730-00-222-8844
FSC: 4730
CAGE: 81795 — ALLIANZ SWEEPER COMPANY (USA)
SPECIFICATIONS
special_featuresHOLDING SLEEVE FOR CANNULATED SCREWDRIVER SHAFT, P/N 314.29 (6515-01-576-8546); FOR USE W/ END ITEM INSTRUMENT AND IMPLANT SET,CANNULATED SCREWS, 6515-01-500-5926
end_item_identification6515-01-500-5926 INSTRUMENT AND IMPLANT SET,CANNULATED SCREWS
part_name_assigned_by_controlling_agencySLEEVE HOLDING SCREWDRIVER
NSN4730-00-222-8844
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 31408 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL PIPE SIZE ACCOMMODATED: 0.375 INCHES ALL ENDS IN
•
SURFACE TREATMENT: ZINC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL PIPE SIZE ACCOMMODATED0.375 INCHES ALL ENDS IN
SURFACE TREATMENTZINC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
31408-001Interchangeable
interchangeable cross-reference
interchangeable
31408Interchangeable
interchangeable cross-reference
interchangeable
6515NCM093724Interchangeable
interchangeable cross-reference
interchangeable
13318Interchangeable
interchangeable cross-reference
interchangeable
314.08Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 31408?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 31408?
31408 is a RESISTOR,VARIABLE,WIRE WOUND,NON.
What parts can replace 31408?
There are 5 known substitutes for 31408: 31408-001, 31408, 6515NCM093724 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 31408?
31408 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-222-8844. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 31408

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026