313946R91 — BEARING,ROLLER,NEEDLE

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

313946R91: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_diameter: 1.3750 INCHES NOMINAL IN, overall_width: 1.0000 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, special_features: OIL HOLE AND OIL GROOVE IN OUTER RING ALS0 MFR STANDARD RETAINER. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-227-3246, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

313946R91

NSN: 3110-00-227-3246
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 29510 — KOMATSU AMERICAN INTL CO (USA)

SPECIFICATIONS

material	STEEL OUTER RING
bore_diameter	1.3750 INCHES NOMINAL IN
overall_width	1.0000 INCHES NOMINAL IN
alignment_type	RIGID
surface_finish	GROUND
special_features	OIL HOLE AND OIL GROOVE IN OUTER RING ALS0 MFR STANDARD RETAINER
style_designator	NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
end_item_identification	MULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
overall_outside_diameter	1.8750 INCHES NOMINAL IN
retainer_fabrication_method	PRESSED
standard_tolerance_designation	AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN	3110-00-227-3246

COMPONENT DIAGRAM

KEY FEATURES

•

RETAINER FABRICATION METHOD: PRESSED

•

SURFACE FINISH: GROUND

•

STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND

•

OVERALL OUTSIDE DIAMETER: 1.8750 INCHES NOMINAL IN

•

ALIGNMENT TYPE: RIGID

TECHNICAL CHARACTERISTICS

RETAINER FABRICATION METHOD	PRESSED
SURFACE FINISH	GROUND
STYLE DESIGNATOR	NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
OVERALL WIDTH	1.0000 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER	1.8750 INCHES NOMINAL IN
ALIGNMENT TYPE	RIGID
SPECIAL FEATURES	OIL HOLE AND OIL GROOVE IN OUTER RING ALS0 MFR STANDARD RETAINER
END ITEM IDENTIFICATION	MULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
STANDARD TOLERANCE DESIGNATION	AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER	1.3750 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 9

HS-223016Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

223016Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

167-6603239FINDNO-DACC-A56Reference document

Same NSN cross-reference

Reference document — Secondary reference

10085890Reference document

Same NSN cross-reference

Reference document — Informative reference only

MR590Reference document

Same NSN cross-reference

Reference document — Secondary reference

MS51961-18Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 313946R91?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 313946R91?

313946R91 is a BEARING,ROLLER,NEEDLE.

What parts can replace 313946R91?

There are 9 known substitutes for 313946R91: HS-223016, 223016, 167-6603239FINDNO-DACC-A56 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 313946R91?

313946R91 is cataloged in the U.S. Government catalog under NSN 3110-00-227-3246. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

313946R91 — BEARING,ROLLER,NEEDLE

Request a Quote — 313946R91