PartsTable
Technical Data Sheet
Download PDF

313217 — LATCH,RIM

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

313217: LATCH,RIM.

The LATCH,RIM is a the manufacturer industrial component. Key specifications include width: 2.000 INCHES NOMINAL IN, height: 0.647 INCHES NOMINAL IN, length: 3.375 INCHES NOMINAL IN, material: STEEL CASE, bolt_type: SINGLE BEVEL NONREVERSIBLE, action_type: SPRING. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-145-4271, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
313217
NSN: 5340-00-145-4271
FSC: 5340 — Hardware, Commercial
CAGE: 23382 — FWD SEAGRAVE HOLDINGS LP (USA)
SPECIFICATIONS
width2.000 INCHES NOMINAL IN
height0.647 INCHES NOMINAL IN
length3.375 INCHES NOMINAL IN
materialSTEEL CASE
bolt_typeSINGLE BEVEL NONREVERSIBLE
action_typeSPRING
operation_methodLEVER HANDLE LATCH BOLT
special_featuresHOLE DIAMETER:0.215 IN.;CASE SHAPE:RECTANGULAR;HOLE SPACING:3 HOLE ALONG TOP AND 3 HOLES ALONG BOTTOM SPACED 0.625 IN. C TO C IN
mounting_hole_quantity6
NSN5340-00-145-4271
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 313217 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 6
•
LENGTH: 3.375 INCHES NOMINAL IN
•
BOLT TYPE: SINGLE BEVEL NONREVERSIBLE
•
ACTION TYPE: SPRING
•
HEIGHT: 0.647 INCHES NOMINAL IN
•
WIDTH: 2.000 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY6
LENGTH3.375 INCHES NOMINAL IN
BOLT TYPESINGLE BEVEL NONREVERSIBLE
ACTION TYPESPRING
HEIGHT0.647 INCHES NOMINAL IN
SPECIAL FEATURESHOLE DIAMETER:0.215 IN.;CASE SHAPE:RECTANGULAR;HOLE SPACING:3 HOLE ALONG TOP AND 3 HOLES ALONG BOTTOM SPACED 0.625 IN. C TO C IN
WIDTH2.000 INCHES NOMINAL IN
MATERIALSTEEL CASE
OPERATION METHODLEVER HANDLE LATCH BOLT
SUBSTITUTES & CROSS-REFERENCES 1
28336Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 313217?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 313217?
313217 is a LATCH,RIM.
What parts can replace 313217?
There is 1 known substitute for 313217: 28336. Substitute compatibility should be verified for your specific system.
What is the NSN for 313217?
313217 is cataloged in the U.S. Government catalog under NSN 5340-00-145-4271. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 313217

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.