PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3130PL0808994
3130PL0808994 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BEARING UNIT,BALL is a the manufacturer industrial component. Key specifications include material: RUBBER AND STEEL SEAL, seal_type: CONTACT, block_type: FIXED, base_length: 1.8750 INCHES NOMINAL IN, bore_diameter: 1.1875 INCHES NOMINAL IN, housing_width: 6.3125 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3130-00-841-2554, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3130PL0808994
NSN: 3130-00-841-2554
FSC: 3130
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialRUBBER AND STEEL SEAL
seal_typeCONTACT
block_typeFIXED
base_length1.8750 INCHES NOMINAL IN
bore_diameter1.1875 INCHES NOMINAL IN
housing_width6.3125 INCHES NOMINAL IN
seal_locationBOTH ENDS
alignment_typeSELF-ALIGNING
base_thickness0.6875 INCHES NOMINAL IN
housing_height3.1562 INCHES NOMINAL IN
shaft_end_typeOPEN
collar_locationONE END
NSN3130-00-841-2554
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 3130PL0808994 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ROTATING ELEMENT LOCKING METHOD: SETSCREW LOCKING COLLAR
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
MOUNTING SLOT WIDTH: 0.7500 INCHES NOMINAL IN
•
MOUNTING SLOT LENGTH: 0.5625 INCHES NOMINAL IN
•
BASE LENGTH: 1.8750 INCHES NOMINAL IN
•
ASSEMBLY OVERALL LENGTH: 1.9062 INCHES NOMINAL IN
•
SEAL LOCATION: BOTH ENDS
•
LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE: 90.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
ROTATING ELEMENT LOCKING METHODSETSCREW LOCKING COLLAR
INTERNAL FIT-UP DESIGNATIONSTANDARD
MOUNTING SLOT WIDTH0.7500 INCHES NOMINAL IN
MOUNTING SLOT LENGTH0.5625 INCHES NOMINAL IN
BASE LENGTH1.8750 INCHES NOMINAL IN
ASSEMBLY OVERALL LENGTH1.9062 INCHES NOMINAL IN
SEAL LOCATIONBOTH ENDS
LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE90.0 DEGREES NOMINAL
BASE THICKNESS0.6875 INCHES NOMINAL IN
LUBRICATION FITTING TYPEPIPE PLUG
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
1 3-16LAKInterchangeable
interchangeable cross-reference
interchangeable
LAK1 3-16MILL7711Interchangeable
interchangeable cross-reference
interchangeable
GL1 3-16Interchangeable
interchangeable cross-reference
interchangeable
NPL-19TInterchangeable
interchangeable cross-reference
interchangeable
KCL-45-1 3/16Interchangeable
interchangeable cross-reference
interchangeable
CL-45-1 3/16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3130PL0808994?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3130PL0808994?
3130PL0808994 is a BEARING UNIT,BALL.
What parts can replace 3130PL0808994?
There are 9 known substitutes for 3130PL0808994: 1 3-16LAK, LAK1 3-16MILL7711, GL1 3-16 and 6 more. Substitute compatibility should be verified for your specific system.
Is 3130PL0808994 still available?
3130PL0808994 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3130PL0808994

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026